Geri Dön

Novel approaches for microscale sensing using silicon and graphene based devices

Başlık çevirisi mevcut değil.

PDF İndir

  1. Tez No: 403330
  2. Yazar: MUSTAFA BULUT COŞKUN
  3. Danışmanlar: Dr. TUNCAY ALAN, Prof. ADRIAN NEILD
  4. Tez Türü: Doktora
  5. Konular: Mekatronik Mühendisliği, Biyoteknoloji, Mechatronics Engineering, Biotechnology
  6. Anahtar Kelimeler: Belirtilmemiş.
  7. Yıl: 2015
  8. Dil: İngilizce
  9. Üniversite: Monash Unıversıty
  10. Enstitü: Yurtdışı Enstitü
  11. Ana Bilim Dalı: Belirtilmemiş.
  12. Bilim Dalı: Belirtilmemiş.
  13. Sayfa Sayısı: Belirtilmemiş.

Özet

Özet yok.

Özet (Çeviri)

Recent advances in nanofabrication technologies and micro-electromechanical systems (MEMS) have attracted significant attention to miniaturized sensors. The combination of small sizes and high sensitivities with integrated wireless transmission capabilities shows great promise in a variety of applications including implantable biomedical devices, electronic pills or general body area networks. However, for all these emerging application areas, which require ever shrinking device sizes, novel sensing approaches are often necessary to retain device functionality. There are different types of sensing methodologies and materials available, each with their own advantages and limitations; as such method selection has to be dependent on the application, required functionality, as well as, other limiting conditions such as the operational environment. Hence, it is challenging to acquire one principal method or material that can universally be applied for a wide range of applications. Potentially, improvements can be achieved through novel sensing approaches, or utilizing a new class of materials to address specific applications. This thesis explores these two approaches on a range of applications which will potentially have widespread appeal and open multiple pathways for further research in the field. Firstly, microfabricated Si based devices are developed which utilise novel approaches to improve sensor performance while decreasing the physical size. This has been realized in three applications areas: (1) a variable inductance displacement sensor, (2) a force sensor using feedback control to nullify displacements and (3) a fringing field capacitive pH sensor. The second part of the thesis focuses solely on using material properties of novel graphene based nanostructures (three dimensional soft graphene monoliths and casted graphene oxide films). Importantly, all complex fabrication procedures and detection circuitry are avoided. Instead, novel features of the materials itself which have been used to measure of (1) vibration and (2) strain. This approach offers simpler designs and relatively cheaper fabrication, as well as having the potential to synergize well with flexible substrates.

Benzer Tezler

  1. Tez No

    496339

    Frequency-selective remote actuation via continuous beam spans

    Sürekli kiriş dizileri yardımıyla frekans-seçici uzaktan tahrik

    JABER SALAMAT

    Yüksek Lisans

    İngilizce

    İngilizce

    2016

    Makine Mühendisliğiİstanbul Teknik Üniversitesi

    Makine Mühendisliği Ana Bilim Dalı

    YRD. DOÇ. DR. ERDAL BULĞAN

  2. Tez No

    450626

    Development of nanoelectromechanical systems functionalized by vacuum organic thermal evaporation and their gas sensing applications

    Vakum organik ısısal buharlaştırma ile fonksiyonelleştirilmiş nanoelektromekanik sistemler ve gaz ölçüm uygulamaları

    MUSTAFA ÇAĞATAY KARAKAN

    Yüksek Lisans

    İngilizce

    İngilizce

    2017

    Makine Mühendisliğiİhsan Doğramacı Bilkent Üniversitesi

    Makine Mühendisliği Ana Bilim Dalı

    YRD. DOÇ. DR. MEHMET SELİM HANAY

  3. Tez No

    759388

    Surface acoustic wave based sonoporation microsystems forsingle tumor cell applications

    Başlık çevirisi yok

    BURAK YILDIRIM

    Doktora

    İngilizce

    İngilizce

    2021

    Bilgisayar Mühendisliği Bilimleri-Bilgisayar ve KontrolUnıversıty Of Mıamı

  4. Tez No

    405048

    Molecular recognition based self assembly of engineered proteins on nanoscaled gold surfaces

    Nano-ölcek metal yüzeylerde moleküler tanıma esaslı kendiliğinden montaj olabilen protein tasarımı

    BANU TAKTAK KARACA

    Doktora

    İngilizce

    İngilizce

    2015

    Biyomühendislikİstanbul Teknik Üniversitesi

    Moleküler Biyoloji-Genetik ve Biyoteknoloji Ana Bilim Dalı (disiplinlerarası)

    PROF. DR. CANDAN TAMERLER

    YRD. DOÇ. DR. BÜLENT BALTA

  5. Tez No

    675588

    Femtosaniye lazer ile işlenen yapıların katıhal lazerlerde uygulamaları ve üst çevrim pompalı Tm3+:KY3F10 lazerleri

    Solid-state laser applications of femtosecond laser written structures and upconversion pumped Tm3+:KY3F10 lasers

    YAĞIZ MOROVA

    Doktora

    Türkçe

    Türkçe

    2021

    Fizik ve Fizik Mühendisliğiİstanbul Teknik Üniversitesi

    Fizik Mühendisliği Ana Bilim Dalı

    DOÇ. DR. SEDA AKSOY ESİNOĞLU

    PROF. DR. ALPHAN SENNAROĞLU

Geri Dön