Modal analysis of 3D printed parts
Başlık çevirisi mevcut değil.
- Tez No: 403165
- Danışmanlar: Dr. STRATIS KANARACHOS
- Tez Türü: Yüksek Lisans
- Konular: Bilgisayar Mühendisliği Bilimleri-Bilgisayar ve Kontrol, Bilim ve Teknoloji, Computer Engineering and Computer Science and Control, Science and Technology
- Anahtar Kelimeler: Belirtilmemiş.
- Yıl: 2017
- Dil: İngilizce
- Üniversite: Coventry Unıversıty
- Enstitü: Yurtdışı Enstitü
- Ana Bilim Dalı: Belirtilmemiş.
- Bilim Dalı: Belirtilmemiş.
- Sayfa Sayısı: Belirtilmemiş.
Özet
Özet yok.
Özet (Çeviri)
The importance of the 3D printing technology increases day by day in the engineering field. Correspondingly, the application of related tests to the parts produced by this technology has a vital role in terms of appropriate design and trouble-free service life. The main scope of this study consists of the modelling, manufacturing, testing, model validation (FEA) and optimization steps. According to the collected literature, there are not many studies about the modal analysis of 3D printed truss structures in the past years. Besides the modal analysis, this project also aims to discuss the static structural test results for the 3D printed truss structures. The primary goals of these tests are to find the stiffness and natural frequency values of the structures. The manufactured structures were tested and the results were compared with each other. In order to validate the experimental tests, the test results were compared with the computational (FEA) results as well.
Benzer Tezler
- Cable-net facades with novel glass nodes: development, design, and testing
Özgün cam düğüm noktalarına sahip kablo-ağ cephelerin geliştirilmesi, tasarımı ve testi
ESRA YAĞDIR ÇELİKER
Yüksek Lisans
İngilizce
2018
İnşaat Mühendisliğiİstanbul Teknik ÜniversitesiMimarlık Ana Bilim Dalı
PROF. DR. OĞUZ CEM ÇELİK
- Filament beslemeli 3D yazıcının nozul bölgesinin sonlu elemanlar yöntemi ile modellenmesi ve analizi
Finite element modeling and analysis of nozzle area of filament feed 3D printer
OĞUZHAN EMRE AKBAŞ
Yüksek Lisans
Türkçe
2019
Makine Mühendisliğiİstanbul Teknik ÜniversitesiMakine Mühendisliği Ana Bilim Dalı
DR. ÖĞR. ÜYESİ ATAKAN ALTINKAYNAK
- Doğrusal motor sistemi üzerine 6 serbestlik derecesine sahip platform tasarımının yapılarak uygulanması ve yazılımın eniyileştirilmesi
Applying the platform with 6 dof level by designing it on to a linear motor system and enhance its software
VOLKAN ÖZTÜRK
Yüksek Lisans
Türkçe
2019
Mekatronik Mühendisliğiİstanbul Gelişim ÜniversitesiMekatronik Mühendisliği Ana Bilim Dalı
PROF. DR. BEDRİ YÜKSEL
- Filament beslemeli 3 boyutlu yazıcılarda imalat parametrelerinin optimizasyonu
Optimization of manufacturing parameters in FDM 3D printers
ONUR HIRA
Yüksek Lisans
Türkçe
2019
Makine Mühendisliğiİstanbul Teknik ÜniversitesiMakine Mühendisliği Ana Bilim Dalı
DR. ÖĞR. ÜYESİ ATAKAN ALTINKAYNAK
- Numerical and experimental investigation on the crushing behaviour of auxetic lattice cells produced with additive manufacturing techniques
Eklemeli imalat teknikleri ile üretilmiş ökzetik kafes yapıların ezilme davranışlarının nümerik ve deneysel olarak incelenmesi
KADİR GÜNAYDIN
Doktora
İngilizce
2020
Makine Mühendisliğiİstanbul Teknik ÜniversitesiUçak ve Uzay Mühendisliği Ana Bilim Dalı
PROF. DR. HALİT SÜLEYMAN TÜRKMEN
DR. ÖĞR. ÜYESİ ANTONIO MATTIA GRANDE