Design, modelling and control of two degrees of freedom flexible antenna sensors
Başlık çevirisi mevcut değil.
- Tez No: 403069
- Danışmanlar: DR. VICENTE FELIU BATLLE
- Tez Türü: Doktora
- Konular: Elektrik ve Elektronik Mühendisliği, Enerji, Electrical and Electronics Engineering, Energy
- Anahtar Kelimeler: Belirtilmemiş.
- Yıl: 2015
- Dil: İngilizce
- Üniversite: Unıversıty Of Castılla-La Mancha
- Enstitü: Yurtdışı Enstitü
- Ana Bilim Dalı: Belirtilmemiş.
- Bilim Dalı: Belirtilmemiş.
- Sayfa Sayısı: Belirtilmemiş.
Özet
Özet yok.
Özet (Çeviri)
We have presented a mechatronic application and the modelling framework needed to control a 2DOF exible-beam sensor using a vibration-free position control and a movement strategy. With regard to the complete mechanics, hardware and software design in their entirety, we have studied and identi ed the overall system parameters and illustrated a complete strategy that can be used to deal with the problems in our speci c case study. In the case of the design framework, we have formulated a complete control strategy and made use of a controlled antenna when the exible-beam sensor comes into contact with objects. This document presents the multiple experiments used to validate all the model assumptions and methods proposed by means of realistic case studies. We have shown the applicability of our design and control as regards exible beam-based sensors and the perception of haptics. The principal features outlined in this thesis are described below: Firstly, we have described the main literature review and framework of the thesis, in addition to providing a short review of the modelling and control of exible beams in order to explain the aims of the thesis and our solution approaches. We have also summarised current literature related to examples of similar beam applications and bio-mimetic active sensors. Secondly, we have introduced a simple mechanism specially designed to have a single vibration mode which may be similar in function to some sensory systems present in nature. However, no e ort is made to attempt to mimic the physical characteristic of natural sensory systems in this work. Thirdly, a complete design that uses a basic computer system has been designed, along with all the necessary software, hardware and sensory system for the complete application. The communication hardware of the interfaces and platform algorithms, such as input/output signals and the communication algorithm, have been designed in order to obtain a suitable sampling time for the entire system. Fourthly, this study proposes a reduced dynamic model of the system and this model has then been used as a basis for the study of a complete control method. We have argued that active sensing should consider the controlled movement of the vibrissal shaft as a characteristic feature of the system and described a vibration-free method and a movement strategy. Fifthly, we have experimentally validated the proposed dynamics and control methods, and have found both the model and assumptions to be valid. Simulations with which to guide many of our designs and proposed methods have also been presented. Finally, illustrative examples of the antenna touching an object have been performed as realistic study cases based on the applicability of the proposed methods when the antenna follows a trajectory.
Benzer Tezler
- Esnek manipülatörün modellenmesi ve kontrolü
Modelling and control of flexible manipulator
BERKAN HIZARCI
Yüksek Lisans
Türkçe
2019
Elektrik ve Elektronik Mühendisliğiİstanbul Teknik ÜniversitesiKontrol ve Otomasyon Mühendisliği Ana Bilim Dalı
DOÇ. DR. SERHAT İKİZOĞLU
- İmalat sistemlerinin tasarlanması ve öncelik kurallarının belirlenmesinde yapay sinir ağlarının kullanılması
<the use of neural networks in determination of the manufacturing systems design and dispatching rules
TARIK ÇAKAR
Doktora
Türkçe
1997
İşletmeİstanbul Teknik Üniversitesiİşletme Mühendisliği Ana Bilim Dalı
PROF. DR. AYHAN TORAMAN
- Evaluation of model-based predictive control methods in high-speed automated ground vehicle path following
Yüksek hızlı bir otonom kara taşıtının yörünge takibinde model bazlı öngörülü kontrol yöntemlerinin değerlendirilmesi
VOLKAN BEKİR YANGIN
Doktora
İngilizce
2024
Makine Mühendisliğiİstanbul Teknik ÜniversitesiMakine Mühendisliği Ana Bilim Dalı
PROF. DR. ÖZGEN AKALIN
- Accelerating molecular docking using machine learning methods
Kenetleme hesaplarının makine öğrenme metotları ile hızlandırılması
ABDULSALAM YAZID BANDE
Yüksek Lisans
İngilizce
2022
Bilim ve Teknolojiİstanbul Teknik ÜniversitesiBilgisayar Bilimleri Ana Bilim Dalı
Assist. Prof. Dr. SEFER BADAY
- Architecture of constraints: A mass customization oriented approach for housing design
Kısıtlarla tanımlanan mimarlık: Kitlesel özelleştirme odaklı konut tasarımı
BENGİSU İLKSOY
Yüksek Lisans
İngilizce
2015
Mimarlıkİstanbul Teknik ÜniversitesiMimarlık Ana Bilim Dalı
DOÇ. DR. MİNE ÖZKAR KABAKÇIOĞLU