Development of material characterization techniques using novel nanoindendation approaches on hard and soft materials used in MEMS
Başlık çevirisi mevcut değil.
- Tez No: 403046
- Danışmanlar: PROF. DR. FERAT ŞAHİN
- Tez Türü: Doktora
- Konular: Elektrik ve Elektronik Mühendisliği, Electrical and Electronics Engineering
- Anahtar Kelimeler: Belirtilmemiş.
- Yıl: 2015
- Dil: İngilizce
- Üniversite: Rochester Instıtute Of Technology
- Enstitü: Yurtdışı Enstitü
- Ana Bilim Dalı: Belirtilmemiş.
- Bilim Dalı: Belirtilmemiş.
- Sayfa Sayısı: Belirtilmemiş.
Özet
Özet yok.
Özet (Çeviri)
Investigating and modeling the mechanical properties of materials is important for many applications. The most common technique used for mechanical characterization of materials is called nanoindentation. The currently available tools utilized in order to perform nanoindentation have their limitations in terms of sensitivities in force and displacement for a broad range of material properties. When it comes to investigation of soft materials, these limitations might be more detrimental. In this dissertation work, novel nanoindentation techniques have been developed with a multi-probe scanning force microscopy (SPM) system in order to ease the major problems encountered with standard Atomic Force Microscopy (AFM) or nanoindentation systems. Tuning forks are used as probes during nanoindentation. By using the newly developed nanoindentation techniques for quasi-static nanoindentation experiments, the force information is extracted through the displacement of the indenter probe measured by a second probe with ultraresolution. For dynamic nanoindentation, frequency modulation techniques have been used to extract force information from a single indenter tuningfork probe. Thanks to the high quality of resonance (Q factor) of tuning fork probes, force measurements can be performed with an ultra high resolution. The accurate measurements of material properties on soft materials is used in characterization of microfabricated pillar sensors which can be used in measuring nN level of cell traction forces in a biomedical application. The techniques developed in this research also enable the system as an ultra-sensitive force sensor to apply nN scale lateral and vertical loads on microfabricated structures or biological specimens.
Benzer Tezler
- Havacılık ve uzay sanayinde kullanılmak üzere yeni bir titanyum alaşımı geliştirilmesi ve mekanik özelliklerinin araştırılması
Development and characterization of mechanical properties of a new titanium alloy for aerospace industry
ERDEM MERMER
Doktora
Türkçe
2023
Metalurji MühendisliğiGazi ÜniversitesiMetalurji ve Malzeme Mühendisliği Ana Bilim Dalı
DOÇ. DR. HANİFİ ÇİNİCİ
PROF. DR. RAHMİ ÜNAL
- Antakya tarihi ticaret merkezi mekansal yapı değişim ve gelişim sürecinin kent ticaret merkezi planlamasına etkinliği
The Effectiveness of spatial structural chance and development period of the historical trade center of Antakya in the urban trade planning
NEVİN TURGUT
Yüksek Lisans
Türkçe
1986
Şehircilik ve Bölge PlanlamaGazi ÜniversitesiŞehir ve Bölge Planlama Ana Bilim Dalı
YRD. DOÇ. DR. NURCAN UYDAŞ
- Ovulasyon indüksiyonu tedavisinde folliküler gelişimin ultrasonografik takibi
Başlık çevirisi yok
MERİH BAYRAM
Tıpta Uzmanlık
Türkçe
1987
Kadın Hastalıkları ve DoğumGazi ÜniversitesiKadın Hastalıkları ve Doğum Ana Bilim Dalı
DOÇ. DR. MÜLAZIM YILDIRIM
- Sivas-Kangal yöresinde kırsal gelişme ve pazara açılma sürecindeki farklılaşmalar (bir örnek olay incelemesi)
Başlık çevirisi yok
FAHRİ ERCEM
Yüksek Lisans
Türkçe
1984
SosyolojiCumhuriyet ÜniversitesiSosyoloji Ana Bilim Dalı
DOÇ. DR. A. VAHAP SAĞ