Surface science and engineering of reduced graphene oxide for graphene-based nano-electronics and ultracapacitors
Başlık çevirisi mevcut değil.
- Tez No: 401242
- Danışmanlar: PROF. YVES J. CHABAL
- Tez Türü: Doktora
- Konular: Metalurji Mühendisliği, Metallurgical Engineering
- Anahtar Kelimeler: Belirtilmemiş.
- Yıl: 2012
- Dil: İngilizce
- Üniversite: The Unıversıty Of Texas At Dallas
- Enstitü: Yurtdışı Enstitü
- Ana Bilim Dalı: Belirtilmemiş.
- Bilim Dalı: Belirtilmemiş.
- Sayfa Sayısı: Belirtilmemiş.
Özet
Özet yok.
Özet (Çeviri)
Graphene is a sp2-hybridized carbon nanosheet with delocalized benzene rings that has unique electrical, optical and mechanical properties. A major driving force for its large area production,high scalability and high volume manufacturability is necessary for its use in industrial applications. Graphene is therefore a promising nano material because of its possible implementation for nano electronics for scaling down the transistors. Therefore, wet processes are necessary for sustainable manufacturing, handling and shaping these sheets in nano scales. For this purpose, understanding graphene sheets in solution environment with direct contact to liquids is tremendously significant since its chemical modification is necessary to derive graphene or graphite into desirable nanostructures to mimic their outstanding properties with a good control of chemistry. Changes in surface or edge interactions result in modified graphene sheets (modified via wet chemistry, thermal processing or combination of both from reduction of graphite or graphene oxide) that are different in terms of their physical and chemical properties. Once many layers are present within different thicknesses, interlayer interactions are intact between the layers or closer to the edges that vary its edge properties. Although the presence of defects in pure graphene is unwanted, defects to certain extents may be also desirable for modified graphene sheets that can easily tailor its surface and edge properties. Therefore,both evaluation of sheet interactions in the presence of oxygen and understanding the oxygen interactions at the sheet edges, within the defective sites, between the sheets and at the interlayers is of main scope of this dissertation. For this purpose, in-situ infrared spectroscopy technique is studied with thermal annealing and supported by other characterization techniques such as x-ray photoelectron spectroscopy, x-ray diffraction, optical microscopy, atomic force microscopy and thermal gravimetric analyses. Apart from these experimental methods,theoretical calculations such as density functional theory simulations are also provided formechanistic details of the experimental findings.
Benzer Tezler
- Pestisit tayini için elektrokimyasal nanosensörlerin hazırlanması ve uygulamaları
Fabrication of electrochemical nanosensors for determination of pesticides and applications
GÜLÇİN BOLAT
Doktora
Türkçe
2016
Mühendislik BilimleriHacettepe ÜniversitesiKimya Ana Bilim Dalı
PROF. DR. SERDAR ABACI
- Titanate nanotubes combined with graphene-based materials as a novel anode material for lithium-ion batteries
Lityum-iyon pilleri için özgün anot malzemesi olarak grafen temelli malzemelerle birleştirilmiş titanat nanotupler
ANAGULI ABULIZI
Yüksek Lisans
İngilizce
2016
Mühendislik BilimleriSabancı ÜniversitesiMalzeme Bilimi ve Mühendisliği Ana Bilim Dalı
DOÇ. DR. SELMİYE ALKAN GÜRSEL
DOÇ. DR. DR. ALP YÜRÜM
- Metal nanopartikül katkılı grafen elektrot ve kitosan elektrolit içeren aktuator (eyleyici) sentezi ve dinamik analizi
Synthesis and dynamic analysis of actuator which contain metal nanoparticle doped graphene based elctrode and chitosan electrolyte
DEHA EMRE KANAR
Yüksek Lisans
Türkçe
2016
Mühendislik BilimleriKaradeniz Teknik ÜniversitesiMetalurji ve Malzeme Mühendisliği Ana Bilim Dalı
YRD. DOÇ. DR. HÜLYA KAFTELEN
- Demir katkılı spinel lityum titanat yapılarının hazırlanması ve süperkapasitör uygulamaları
Preparation of iron doped spinal lithium titanate structures and supercapacitor applications
SEDA GÜRGEN
Yüksek Lisans
Türkçe
2018
Mühendislik BilimleriMersin ÜniversitesiNanoteknoloji ve İleri Malzemeler Ana Bilim Dalı
PROF. DR. KASIM OCAKOĞLU
- Metal-organic framework/graphene oxide derived porous carbons for platinum based electrocatalysts for oxygen reduction reaction
Metal-organik kafes/grafen oksit türevli gözenekli karbonların platin bazlı oksijen indirgenme reaksiyonu elektrokatalizörlerinde kullanımı
EMRE BURAK BOZ
Yüksek Lisans
İngilizce
2019
Mühendislik BilimleriSabancı ÜniversitesiMalzeme Bilimi ve Nanoteknoloji Mühendisliği Ana Bilim Dalı
PROF. DR. SELMİYE ALKAN GÜRSEL