Vanadium oxide based materials as oxidative dehydrogenation catalyst: Synthesis, characterization and properties
Başlık çevirisi mevcut değil.
- Tez No: 401059
- Danışmanlar: PROF. M. ISHAQUE KHAN
- Tez Türü: Doktora
- Konular: Kimya, Chemistry
- Anahtar Kelimeler: Belirtilmemiş.
- Yıl: 2013
- Dil: İngilizce
- Üniversite: Illınoıs Instıtute Of Technology
- Enstitü: Yurtdışı Enstitü
- Ana Bilim Dalı: Belirtilmemiş.
- Bilim Dalı: Belirtilmemiş.
- Sayfa Sayısı: Belirtilmemiş.
Özet
Özet yok.
Özet (Çeviri)
The project concerns with design, synthesis and characterization of molecular and extended structure materials composed of vanadium oxides and evaluation of their catalytic oxidative dehydrogenation (ODH) properties. A long-term objective is to develop an understanding of the structure-property relationships in ODH catalysts. Chapter 1 provides an overview of the field of metal oxides, polyoxometalates, and catalytic oxidative dehydrogenation of propane. This chapter also defines the research problem concerning this thesis and its fundamental and practical significance. Chapters 2-4 describe the synthesis, characterization and ODH properties of a select number of structurally correlated vanadium oxide based materials. The ODH catalysts studied in this work includes molecular compounds - (NH4)8[VIV 12VV 6O42(SO4)0.85(VO4)0.15]·10H2O (NH4-POV) and NH4V10O28, layered structure materials - MgVV 2VIV 2O10·4H2O (MV4) and V2O5, a chain structure - NH4VO3, and a nanostructured three-dimensional framework material - [Co3V18O42(H2O)12 (XO4)]·24H2O (X = V, S) (Co-POV). Their catalytic activities for ODH of propane to propylene - an important industrial feedstock material, were studies and compared in an attempt to get an insight of the structure-property relationships. Chapter 2 discusses synthesis and characterization of a new mixed-valence vanadate, MgVV 2VIV 2O10·4H2O (MV4), an extended structure solid, synthesized hydrothermally and characterized by single-crystal X-ray diffraction, spectroscopic methods, thermogravimetric analyses and temperature dependent magnetic measurements. MV4 represents the first model compound for the naturally occurring mineral melonovanadite, Ca2VV 4VIV 4O20·10H2O. MV4 is an important material with structural and electronic properties that are attractive for making it a potential promising ODH catalyst. The framework structure in MV4 consists of vanadium oxide layers crosslinked by {Mg(H2O)4} groups. The vanadium oxide layers are composed of edge shared {VIVO5} square pyramids, forming {V2O8} dimers, which share corners with {VVO4} tetrahedral units. Chapter 2 also discusses synthesis of a novel mixed-valence molecular polyoxovanadate - (NH4)8[VIV 12VV 6O42(SO4)0.85(VO4)0.15]·10H2O (NH4-POV) and its characterization by single-crystal X-ray diffraction, spectroscopic and thermogravimetric analyses. Structure consists of {V18O42} shell composed of 18 edge sharing {VO5} square pyramids, hosting a tetrahedral species {XO4} (X = S, V). Highly reduced molecular structure of NH4-POV makes it a promising ODH catalyst. Chapter 3 describes the ODH properties of a polyoxovanadate based openframework material - [Co3V18O42(H2O)12 (XO4)]·24H2O (X = V, S) (Co-POV). It is composed of {V18O42(XO4)} (X = S, V) building units, which is the molecular cluster present in NH4-POV, interconnected by {-O-Co-O-} bridging groups. Alternatively, since the building unit clusters {V18O42XO4} can be viewed as derived from sheets of V2O5, the 3-D structure of Co-POV can be viewed as made of V2O5 and CoO units. Therefore the ODH property of Co-POV was compared with the ODH property of the molecular cluster NH4-POV on one hand and with the V2O5 and CoO on the other hand. Co-POV was shown to have superior catalytic performance for ODH of propane as compared with its constituent metal oxides, V2O5, CoO and their mixture. ODH of propane reaction over NH4-POV catalyst has higher propylene selectivity of above 60% at moderate temperatures as compared to 37% selectivity of Co-POV catalyst. Supporting NH4-POV on high surface area γ-alumina was shown to improve propane conversion drastically. In this study, highest propylene yield of 13% was achieved at 550 °C by supported NH4-POV catalyst. On the other hand, MV4 showed catalytic activity at marginally low temperature 200 °C due to propane activation energy (Ea) of 27 kJ/mol, the lowest Ea found in this study. Co-POV was utilized as a model compound to describe the effect of varying doses of γ-ray irradiation on the catalytic ODH properties of polyoxometalates for the first time. γ-ray irradiation enhanced catalysts' selectivity to propylene during the oxidative dehydrogenation of propane. Chapter 4 describes full characterization of the catalysts studied in this work by powder X-ray diffraction analysis, temperature programmed reduction, X-ray absorption fine structure, BET surface area analysis and scanning electron microscopy. Structural changes of catalysts were investigated by comparing characterization results of asprepared, oxygen pretreated and post-catalysis (spent) catalysts. New vanadium oxide phases formed upon oxygen pretreatment. In general, ODH catalysis did not further alter catalysts' structures.
Benzer Tezler
- Fabrication of vanadium and niobium borides via milling-assisted solid state synthesis methods and sintering techniques
Vanadyum ve niyobyum borürlerin öğütme destekli katı hal sentezleme yöntemleri ve sinterleme teknikleri ile üretimi
ÖZGE BALCI
Doktora
İngilizce
2015
Metalurji Mühendisliğiİstanbul Teknik ÜniversitesiMetalurji ve Malzeme Mühendisliği Bölümü
PROF. DR. İSMAİL DUMAN
- Investigation of nanostructured vanadium oxides by wet chemical processing: Structural, morphological, optical, and electrochemical analysis
Sıvı-hal yöntemi ile elde edilen nanoyapılı vanadyum oksitlerin incelenmesi: Yapısal, morfolojik, optik ve elektrokimyasal analiz
MUSA EROL
Yüksek Lisans
İngilizce
2017
Kimya Mühendisliğiİstanbul Teknik ÜniversitesiNanobilim ve Nanomühendislik Ana Bilim Dalı
PROF. DR. ESRA ÖZKAN ZAYİM
- Ergimiş tuz elektrolizi ile vanadyum borür üretimi
Production of vanadium borides by molten salt electrolysis
ELİF ECEM ÖZGÜVENÇ
Yüksek Lisans
Türkçe
2024
Metalurji Mühendisliğiİstanbul Teknik ÜniversitesiMetalurji ve Malzeme Mühendisliği Ana Bilim Dalı
PROF. DR. GÜLDEM KARTAL ŞİRELİ
- KRTD-bor uygulamasında alüminyum oksit (Al2O3) katkısının etkisi
The effect of aluminum oxide (Al2O3) additive in CRTD-bor application
DENİZ AKGÜL
Yüksek Lisans
Türkçe
2024
Metalurji Mühendisliğiİstanbul Teknik ÜniversitesiMetalurji ve Malzeme Mühendisliği Ana Bilim Dalı
PROF. DR. GÜLDEM KARTAL ŞİRELİ
- Tungsten oksit ve katkılı tungsten oksit ince filmlerin hazırlanması ve karakterizasyonu
Preparation and characterization of tungsten oxide and doped tungsten oxide thin films
ESRA ÖZKAN ZAYİM
Doktora
Türkçe
2002
Fizik ve Fizik Mühendisliğiİstanbul Teknik ÜniversitesiFizik Mühendisliği Ana Bilim Dalı
PROF. DR. FATMA Z. TEPEHAN