Integration of bulk piezoelectric materials into microsystems
Başlık çevirisi mevcut değil.
- Tez No: 400897
- Danışmanlar: PROF. KHALIL NAJAFI
- Tez Türü: Doktora
- Konular: Elektrik ve Elektronik Mühendisliği, Electrical and Electronics Engineering
- Anahtar Kelimeler: Belirtilmemiş.
- Yıl: 2012
- Dil: İngilizce
- Üniversite: Unıversıty Of Mıchıgan
- Enstitü: Yurtdışı Enstitü
- Ana Bilim Dalı: Belirtilmemiş.
- Bilim Dalı: Belirtilmemiş.
- Sayfa Sayısı: Belirtilmemiş.
Özet
Özet yok.
Özet (Çeviri)
Bulk piezoelectric ceramics, compared to deposited piezoelectric thin-films, provide greater electromechanical coupling and charge capacity, which are highly desirable in many MEMS applications. In this thesis, a technology platform is developed for wafer-level integration of bulk piezoelectric substrates on silicon, with a final film thickness of 5-100?m. The characterized processes include reliable low-temperature (200?C) AuIn diffusion bonding and parylene bonding of bulk-PZT on silicon, wafer-level lapping of bulk-PZT with high-uniformity (±0.5?m), and low-damage micro-machining of PZT films via dicing-saw patterning, laser ablation, and wet-etching. Preservation of ferroelectric and piezoelectric properties is confirmed with hysteresis and piezo-response measurements. The introduced technology offers higher material quality and unique advantages in fabrication flexibility over existing piezoelectric film deposition methods. In order to confirm the preserved bulk properties in the final film, diaphragm and cantilever beam actuators operating in the transverse-mode are designed, fabricated and tested. The diaphragm structure and electrode shapes/sizes are optimized for maximum deflection through finite-element simulations. During tests of fabricated devices, greater than 12?mPP displacement is obtained by actuation of a 1mm2 diaphragm at 111kHz with <7mW power consumption. The close match between test data and simulation results suggests that the piezoelectric properties of bulk-PZT5A are mostly preserved without any necessity of repolarization. Three generations of resonant vibration energy harvesters are designed, simulated and fabricated to demonstrate the competitive performance of the new fabrication process over traditional piezoelectric deposition systems. An unpackaged PZT/Si unimorph harvester with 27mm3 active device volume produces up to 205?W at 1.5g/154Hz. The prototypes have achieved the highest figure-of-merits (normalized-power-density × bandwidth) amongst previously reported inertial energy harvesters. The fabricated energy harvester is utilized to create an autonomous energy generation platform in 0.3cm3 by system-level integration of a 50-80% efficient power management IC, which incorporates a supply-independent bias circuitry, an active diode for low-dropout rectification, a bias-flip system for higher efficiency, and a trickle battery charger. The overall system does not require a pre-charged battery, and has power consumption of <1?W in active-mode (measured) and <5pA in sleep-mode (simulated). Under 1g vibration at 155Hz, a 70mF ultra-capacitor is charged from 0V to 1.85V in 50 minutes.
Benzer Tezler
- Akustik yüzey dalga esasına dayanan filtrlerin analizi, tasarımı ve GSM sistemindeki uygulamaları
Analysis and design of saw filter and saw filter applications in GSM
H.CEMİL KARAGÜZEL
Yüksek Lisans
Türkçe
1997
Elektrik ve Elektronik Mühendisliğiİstanbul Teknik ÜniversitesiElektronik ve Haberleşme Mühendisliği Ana Bilim Dalı
PROF. DR. ERGÜL AKÇAKAYA
- Akustik kitle dalga esasına dayanan rezonatörlerin analizi ve tasarımı
Analysis and design of acoustic bulk wave resonators
EMİR TUFAN
Yüksek Lisans
Türkçe
1993
Elektrik ve Elektronik Mühendisliğiİstanbul Teknik ÜniversitesiPROF.DR. ERGÜL AKÇAKAYA
- Ni/ZnO nanokompozit partiküllerinin ultrasonik sprey piroliz tekniğiyle üretimi
Production of Ni/ZnO nanocomposite particles via ultrasonic spray pyrolysis (USP) method
İLAYDA KOÇ
Yüksek Lisans
Türkçe
2013
Metalurji Mühendisliğiİstanbul Teknik Üniversitesiİleri Teknolojiler Ana Bilim Dalı
PROF. DR. SEBAHATTİN GÜRMEN
- Integration of silicon nanowires with 3D devices: Fabrication and modeling
Başlık çevirisi yok
MOHAMMAD NASR ESFAHANI
Doktora
İngilizce
2017
Makine MühendisliğiKoç ÜniversitesiMakine Mühendisliği Ana Bilim Dalı
DOÇ. DR. BURHANETTİN ERDEM ALACA
- Integration of SCADA (supervisory control and data acquisition) with GIS (geographic information systems) for water quality modeling of distribution networks
Su dağıtım şebekelerinin kalite modellemesinde SCADA (yönetsel denetim ve veri elde etme)'nin CBS (coğrafi bilgi sistemleri) ile entegrasyonu
GÖKHAN BAĞCI
Yüksek Lisans
İngilizce
2001
Çevre MühendisliğiOrta Doğu Teknik ÜniversitesiÇevre Mühendisliği Ana Bilim Dalı
DOÇ. DR. NURİ MERZİ
PROF. DR. SELÇUK SOYUPAK