Termal işlem ve mekanik yorulmanın farklı rezin simanlar ile yapıştırılmış tüm seramik restorasyonların dentine olan bağ dayanımı üzerine etkisinin araştırılması
Effect of thermal cycle and loading cycle on resin-dentin bondstrengths of full ceramic crowns cemented with different luting
- Tez No: 399064
- Danışmanlar: PROF. DR. MEHMET SONUGELEN
- Tez Türü: Doktora
- Konular: Diş Hekimliği, Dentistry
- Anahtar Kelimeler: Dental bonding, Dental mine, Dental porselen, Dental restorasyon, Dental stres analizi, Dental çimentolar, Termal gerilme, Dental bonding, Dental enamel, Dental porcelain, Dental restoration, Dental stress analysis, Dental cements, Thermal stress
- Yıl: 2014
- Dil: Türkçe
- Üniversite: Ege Üniversitesi
- Enstitü: Sağlık Bilimleri Enstitüsü
- Ana Bilim Dalı: Protetik Diş Tedavisi Ana Bilim Dalı
- Bilim Dalı: Belirtilmemiş.
- Sayfa Sayısı: Belirtilmemiş.
Özet
Bu çalışmanın amacı farklı yapıştırma sistemlerinin yapay yaşlandırma sonrasında performansları arasında bir fark olmadığı hipotezine bağlı olarak mikroçekme ve nanosızıntı değerlerinin karşılaştırılmasıdır. Yapılan araştırmalara sonucunda yapay yaşlandırma öncesi ve sonrası mikroçekme ve nanosızıntı değerleri açısından istatistiksel olarak bir fark bulunamamıştır. En düşük mikroçekme değeri kendinden adezivli sistemde görülürken, en fazla nanosızıntı kendinden asitli sistemde görülmüştür. Bu çalışmanın sınırlılıklarına rağmen elde edilen veriler sonucunda adeziv sistemlerin oral koşullarda klinik performansları kabul edilebilir düzeydedir.
Özet (Çeviri)
The objectives of this study were as follows: to compare the microtensile bond strengths (MTBS) between different adhesive systems to dentin based on the hypothesis that dentin bond strengths of all adhesive sytem may be similareven after artificial aging; to investigate the effects of artificial aging (thermocycling and mechanical loading) on the MTBS of different adhesives systems based on the hypothesis that artificial aging don't affect the dentin bond strength; and to evaluate the effects of aging with TC/ML on nanoleakage of adhesive systems.The interactions among before and after artificial aging MTBS and nanoleakage data there are not statistacally significance. The differences in MTBS data between total-etch and self-etch group and the others were significant (p<0.05). The least amount of MTBS was for the self-adhesive group . The differences in nanolekage data between the all groups were significant (p<0.05). The amount of nanolekage of self-etching adhesive was the highest in all groups. Within the limitations of this study, it can be concluded that the performance of the adhesive systems under oral conditions is acceptiable.
Benzer Tezler
- Transformatör çekirdeklerinde kullanılan cam elyaf takviyeli polyesterimid reçine kompozitin mekanik özelliklerinin incelenmesi
Investigation of the mechanical properties of glass fiber reinforced polyesterimide resin composites for transformer core applications
BARIŞ İŞLER
Yüksek Lisans
Türkçe
2025
Makine Mühendisliğiİstanbul Teknik ÜniversitesiMekatronik Mühendisliği Ana Bilim Dalı
DR. ÖĞR. ÜYESİ İBRAHİM MEHMET PALABIYIK
- A comparison of fatigue strength assessment of seam-welded joints using methods of different standards used in rail vehicle construction
Demiryolu taşıtlarında kullanılan kaynaklı bağlantıların farklı standartlardaki yöntemler ile yorulma mukavemeti değerlendirmesinin karşılaştırılması
ADA ÖZCEÇELİK
Yüksek Lisans
İngilizce
2025
Makine Mühendisliğiİstanbul Teknik ÜniversitesiMakine Mühendisliği Ana Bilim Dalı
PROF. DR. EMİN SÜNBÜLOĞLU
- Investigation of mechanical and thermal properties of TiB2 coating grown on Ti-6Al-4V VIA CRTD-Bor
KRTD-Bor Tekniği ile Ti-6Al-4V üzeri̇nde oluşturulan TiB2 kaplamanin mekani̇k ve termal özelli̇klere etki̇si̇
EGE DEMİR
Yüksek Lisans
İngilizce
2025
Metalurji Mühendisliğiİstanbul Teknik ÜniversitesiMalzeme Bilimi ve Mühendisliği Ana Bilim Dalı
PROF. DR. GÜLDEM KARTAL ŞİRELİ
- Fused filament fabrication of PETG: Investigation of the mechanical properties through the parameter optimization
PETG'nin ergiyik yığma modellemesi: Mekanik özelliklerinin parametre optimizasyonu ile incelenmesi
BUKET PARLAK
Yüksek Lisans
İngilizce
2022
Uçak Mühendisliğiİstanbul Teknik ÜniversitesiUçak ve Uzay Mühendisliği Ana Bilim Dalı
DOÇ. DR. HÜLYA CEBECİ
- Yüksek silisyum ve molibden içeren dökme demirlerin kutu alüminizasyonu ve yüksek sıcaklık oksidasyon davranışının incelenmesi
Pack aluminizing of high Si-Mo cast iron and investigation of high temperature oxidation behavior
FATİH KURT
Yüksek Lisans
Türkçe
2017
Metalurji Mühendisliğiİstanbul Teknik ÜniversitesiMetalurji ve Malzeme Mühendisliği Ana Bilim Dalı
YRD. DOÇ. DR. NURİ SOLAK