Farklı kompozisyonlardaki polyesterlerin mekanik özelliklerinin -yapıya bağlı olarak- deneysel ve teorik olarak incelenmesi
Başlık çevirisi mevcut değil.
- Tez No: 3561
- Danışmanlar: YRD. DOÇ. DR. SEDAT ÜLKÜ
- Tez Türü: Yüksek Lisans
- Konular: Makine Mühendisliği, Mechanical Engineering
- Anahtar Kelimeler: Belirtilmemiş.
- Yıl: 1987
- Dil: Türkçe
- Üniversite: Uludağ Üniversitesi
- Enstitü: Fen Bilimleri Enstitüsü
- Ana Bilim Dalı: Makine Mühendisliği Ana Bilim Dalı
- Bilim Dalı: Belirtilmemiş.
- Sayfa Sayısı: Belirtilmemiş.
Özet
Özet yok.
Özet (Çeviri)
ABSTRACT In this study, u>hat kind of changes may occorin the mechanical properties of glass reinforced plastics are investigated. In Chapter 1 u»e briefly dealed *oith differences in general properties of plastic materials in comparison uiith metalic materials. In Chapter 2 the structures of these ma terials,manifac tur ing techniques, varieties and casting tech niques are mentioned. Mechanical properties of polyester resin, twhich is a plastic material, as being matrix material and those of com posite material obtained by using glass strand^at as reinforced material are mentioned theoretically in Chapter 3. In the fourth chapter,u>hich is devoted to experimental studies, by using polyester resin, u»ith is commercial name NEOXILRP 325, and glass uioven and glass- ^strand mat as -.» rein-^ forcing materials me prepared tensile test specimens of dif ferent resin/glass reinforcement ratio. These specimens are subjected to tensile test and their breaking stresses and modulie of elasticity are experimentally determined. Also dynamic modulie of elasticity of these specimens are deter mined by using ultrasonic test methods.. It is concluded that reinforcement of plastics impro ves their mechanical properties as comparable u^ith metals.
Benzer Tezler
- Zeolite based composites in energy storage
Başlık çevirisi yok
FİKRİ NEGİŞ
Yüksek Lisans
İngilizce
1999
Kimyaİzmir Yüksek Teknoloji EnstitüsüMalzeme Bilimi ve Mühendisliği Ana Bilim Dalı
PROF. DR. SEMRA ÜLKÜ
- Çimento endüstrisinde harmanlama prosesinin öz uyarlamalı kontrolü
Başlık çevirisi yok
ŞERMİN KARAHASANOĞLU
- Ballistic performance and impact behavior of alumina armor ceramic
Alümina zırh seramiklerinin balistik performansı ve çarpışma davranışı
MURAT VURAL
Doktora
İngilizce
1998
Uçak Mühendisliğiİstanbul Teknik ÜniversitesiHavacılık ve Uzay Mühendisliği Ana Bilim Dalı
PROF. DR. M. ZEKİ ERİM
- Demir bazlı süperalaşımların mekanik alaşımlama metodu ile üretilmesi ve özelliklerinin araştırılması
Production of iron based superalloys by the method of mechanical alloying and investigation of their properties
YUSUF KILINÇ
Doktora
Türkçe
1999
Eğitim ve ÖğretimGazi ÜniversitesiMakine Eğitimi Ana Bilim Dalı
DOÇ. DR. MEHMET TÜRKER
- Erken Hristiyan ve ilk Bizans resim ve kabartma sanatında kaynak ve okullar (2 cilt)
Sources and school of painting and sculpture during the early Christian and first Byzantine period
AHMET MEHMET KİPMEN
- Hidroklorotiyazid ve farklı yapıdaki diüretikleri kombine biçimde içeren tıbbi müstahzarlarda nitel ve nicel çalışmalar
Qualitative and quantitative of mixture preparations which contains hydrochlorothiazide and different diuretic compounds
EBRU TEKEREK
Yüksek Lisans
Türkçe
1998
Eczacılık ve FarmakolojiGazi ÜniversitesiFarmasötik Kimya Ana Bilim Dalı
PROF. DR. OKAN ATAY