Geri Dön

İyon değişimi yöntemi ile sulu çözeltiden ve atıksudan sülfat gideriminin incelenmesi

Investigation of sulphate removal from aqueous solutions and wastewater by ion exchange method

  1. Tez No: 348591
  2. Yazar: FİLİZ EREN
  3. Danışmanlar: YRD. DOÇ. DR. TİJEN ENNİL KÖSE
  4. Tez Türü: Yüksek Lisans
  5. Konular: Kimya Mühendisliği, Chemical Engineering
  6. Anahtar Kelimeler: Sülfat, Lewatit Monoplus M600, Kesikli sistem, kolon çalışması, iyon değişimi, Atık su arıtma, Sulphate, Lewatit Monoplus M600, Batch system, Column study, Ion exchange, Waste water treatment
  7. Yıl: 2013
  8. Dil: Türkçe
  9. Üniversite: Eskişehir Osmangazi Üniversitesi
  10. Enstitü: Fen Bilimleri Enstitüsü
  11. Ana Bilim Dalı: Kimya Mühendisliği Ana Bilim Dalı
  12. Bilim Dalı: Kimyasal Teknolojiler Bilim Dalı
  13. Sayfa Sayısı: Belirtilmemiş.

Özet

Bu çalışmada Lewatit Monoplus M600 reçinesini kullanarak iyon değişimi yöntemi ile sülfat giderimi incelenmiştir. Çalışmanın sulu çözelti ile yapılan kısmında, sülfat giderimi üzerine temas süresi, sıcaklık, çözeltinin başlangıç pH?sı ve çözeltinin başlangıç derişiminin etkisi incelenmiş ve elüsyon işlemi yapılmıştır. En iyi sülfat giderimi; 500 mL 100 mg/L sodyum sülfat çözelti/ 5 g reçine ile pH 5,36 değerinde, 20 oC?de 3 saat iyon değişimi ile sağlanmıştır. Sülfat sorpsiyon izoterminin Langmuir izotermine uygun olduğu görülmüştür. Farklı sıcaklıklarda elde edilen veriler kullanılarak termodinamik parametreler hesaplanmıştır. Çalışmanın atıksu ile yapılan kısmında sülfat giderimi çalışmalarında, temas süresi ve çözeltinin başlangıç pH?ı incelenmiştir. En iyi sülfat giderimi %73,2 değeri ile 500 mL atıksu/ 5 g reçine için pH 9,79 değerinde, 20 oC?de 90 dakika iyon değişimi ile sağlanmıştır. Çalışmanın son kısmında, Lewatit Monoplus M600 reçinesi kullanılarak kolon sorpsiyon-elüsyon deneyleri yapılmıştır. Kırılma eğrisi besleme akış hızının fonksiyonu olarak elde edilmiş ve reçine kapasitesi hesaplanmıştır. Reçine tarafından tutulan sülfat 0,5 M NaCl çözeltisi ile elue edilmiştir. Thomas ve Yoon-Nelson modeli, kırılma eğrisini belirlemek için deneysel verilere uygulanmıştır.

Özet (Çeviri)

In this study, removal of sulphate by the ion exchange method with Lewatit Monoplus M600 resin was investigated. In this study performed with aqueous solution,the effect of contact time, temperature, initial pH and concentration of solution was investigated on the sulphate removal and elution process was carried out. The best sulphate removal was obtained by ion exchange method at the conditions 500 mL sulphate solution/ 5 g resin, pH value of 5,36 at 20 ° C and 3 hour contact time. The percent removal of sulphate decreased as temperature and initial sulphate concentration increased. It was observed that the sulphate sorption isotherm was in accordance with Langmuir izotherm. The thermodynamic parameters were also calculated for this process. In the study performed with wastewater, the effects of contact time, initial pH of the solution on removal of sulphate were investigated. The best sulphate removal conditions were found as of 500 mL wastewater / 5 g resin, pH value of 9.79, 20 ° C and 90 minute contact time. In the last part of the study, column sorption-elution experiments for sulphate removal were performed using Lewatit Monoplus M600 anion exchange resin. The breakthrough curve was obtained as a function of feed flow rate and then capacity value of resin was calculated. The sulphate on the resin was quantitatively eluted with 0,5 M NaCl solution at different flow rates. Thomas and Yoon-Nelson models were applied to experimental data to predict the breakthrough curves .

Benzer Tezler

  1. Synthesis, characterization and adsorption kinetic studies of nanocomposite decolorant resins

    Renk giderici nanokompozit reçinelerin sentezi, karakterizasyonu ve adsorpsiyon kinetiği çalışmaları

    SEHER UZUNSAKAL

    Yüksek Lisans

    İngilizce

    İngilizce

    2012

    Polimer Bilim ve Teknolojisiİstanbul Teknik Üniversitesi

    Polimer Bilim ve Teknolojisi Ana Bilim Dalı

    PROF. NURSELİ UYANIK

  2. Farklı fonksiyonel gruplara sahip polimerik nanofiberlerin arsenik gideriminde kullanılması

    Polymeric nanofibers having different functional groups for arsenic removal

    LEVENT KILIÇ

    Yüksek Lisans

    Türkçe

    Türkçe

    2019

    Çevre MühendisliğiBursa Teknik Üniversitesi

    Çevre Mühendisliği Ana Bilim Dalı

    DR. ÖĞR. ÜYESİ AHMET AYGÜN

  3. Synthesis of tris(hydroxymethyl)aminomethane modified polystyrene based polymeric sorbent and removal of boron from aqueous solutions

    Tris(hidroksimetil)aminometan ile modifiye edilmiş polistiren esaslı polimerik sorbentin hazırlanması ve sulu ortamdaki borun giderilmesinde kullanılması

    ARZU ERSOY

    Yüksek Lisans

    İngilizce

    İngilizce

    2017

    Polimer Bilim ve Teknolojisiİstanbul Teknik Üniversitesi

    Polimer Bilim ve Teknolojisi Ana Bilim Dalı

    PROF. DR. BAHİRE FİLİZ ŞENKAL

  4. Atık sularda ağır metal kirliliğinin doğal zeolit (klinoptilolit) ile gideriminin araştırılması

    Investigation of removal of heavy metal pollution in wastewaters with natural zeolite (clinoptilolite)

    NEVZAT BEYAZIT

    Doktora

    Türkçe

    Türkçe

    2001

    Çevre MühendisliğiCumhuriyet Üniversitesi

    Çevre Mühendisliği Ana Bilim Dalı

    PROF. DR. İBRAHİM PEKER

  5. İyon değişimi yöntemi ile sulu çözeltiden bor giderimi üzerine etki eden parametrelerin incelenmesi

    Investigation of effects of parameters on boron removal from aqueous solutions by ion exchange method

    TİJEN ENNİL BEKTAŞ

    Doktora

    Türkçe

    Türkçe

    2005

    Kimya MühendisliğiEskişehir Osmangazi Üniversitesi

    Kimya Mühendisliği Ana Bilim Dalı

    Y.DOÇ.DR. NEŞE ÖZTÜRK