The influence of the contact conditions on the dispersion of the axisymmetric longitudinal waves in the pre-stressed compound cylinder
Öngerilmeli bileşik silindirlerde temas koşullarının eksenel simetrik boyuna dalga yayılımına etkisi
- Tez No: 315437
- Danışmanlar: PROF. DR. ÜNAL ALDEMİR
- Tez Türü: Doktora
- Konular: Bilim ve Teknoloji, Science and Technology
- Anahtar Kelimeler: Belirtilmemiş.
- Yıl: 2011
- Dil: Türkçe
- Üniversite: İstanbul Teknik Üniversitesi
- Enstitü: Fen Bilimleri Enstitüsü
- Ana Bilim Dalı: İnşaat Mühendisliği Ana Bilim Dalı
- Bilim Dalı: Yapı Mühendisliği Bilim Dalı
- Sayfa Sayısı: Belirtilmemiş.
Özet
Yapı malzemelerindeöngerilme ve ön şekil değiştirmenin oluşması farklı sebeplere dayanır. Son çeyrek yüzyılda yapı malzemelerinde meydana gelen öngerilmelerin hem teorik hem de pratik bakımından incelenmesi önem kazanmıştır. Öngerilmenin malzemenin kullanımı sırasında oluşturduğu etkiler verimlilik, emniyet ve konfor gibi değişik açılardan araştırılmıştır.Bu çalışmada öngerilmeli iki katlı bileşik silindirlerde temas koşullarının eksenel simetrik boyuna dalga yayılımına etkisi incelenmiştir. Çalışmada parçalı homojen cisim modeli olarak, öngerilmeli elastik cisimlerde üç boyutlu doğrusallaştırılmış elastik dalga yayılımı teorisi kullanılmıştır (ÖOÜDEDYT). Bileşik silindirlerin katmanlarından herbiri sıkışabilir hiper elastik malzemeden yapılmış kabul edilerek malzemenin mekanik davranışı harmonik potansiyel ile tanımlanmıştır. Silindirler arasındaki temas yüzeyinde süreksizlik derecesinin kayma-yay parametresine bağlı olduğu kabulü yapılmıştır. Bu parametrenin değişiminin temel modlara ait dispersiyon eğrilerine etkisi geniş bir biçimde incelenmiştir. Sayısal sonuçlar grafikler halinde verilmiş ve bu sonuçların elde edilmesi için uygun algoritma geliştirilmiştir.Sunulan çalışma, öngerilmeli iki katlı bileşik silindirlerde sürekli ve süreksiz temas koşullarının eksenel simetrik boyuna dalga yayılımına etkisinin incelenmesine yönelik ilk girişimdir.
Özet (Çeviri)
Initial stresses and strains can occur in structural materials due to the different reasons. Both theoretical and practical investigation of initial stresses in the structural materials have become important in the last quarter of the century. The effects of the initial strains on the materials in use has been investigated in many ways such as efficiency, safety and comfort.In this study, the influence of the imperfectness of the interface conditions on the dispersion of the axisymmetric longitudinal waves in the pre-strained compound cylinder is investigated. The investigations are performed within the framework of the piecewise homogeneous body model by utilizing the 3D linearized theory of elastic waves in elastic bodies with initial stresses( TLTEWISB). It is assumed that the layers of the compound cylinder are made from high elastic compressible materials and their elasticity relations are given through the harmonic potential. The shear spring type imperfectness of the interface conditions is considered and the degree of this imperfectness is estimated by the shear-spring parameter. Numerical results showing the influence of this parameter on the behavior of the dispersion curves are obtained related to the fundamental mode.The previously performed algorithms are modified for the present study and than the numerical results and graphs are obtained using the modified programs.The present study is the first attempt to investigate the influence of the imperfectness of the interface conditions on the dispersion of the axisymmetric longitudinal waves in the pre-stressed compound cylinder.
Benzer Tezler
- Sonlu önşekildeğiştirmeye sahip ve elastomer malzemeden yapılmış çok katlı içi boş silindirlerde yayılan burulma dalgalarının dispersiyonuna katlar arasındaki ideal olmayan temas koşullarının etkisi
The influence of the imperfect contact conditions on the dispersion of the torsional waves propagated in the many layered hollow cylinder made of highly elastic materials
EYYÜP KARAFAKI
Doktora
Türkçe
2020
Makine MühendisliğiYıldız Teknik ÜniversitesiMakine Mühendisliği Ana Bilim Dalı
DR. ÖĞR. ÜYESİ TAMER KEPÇELER
- Tam bağli olmayan temas koşullari altinda elastik ve ön gerilmeli tabaka ile örtülmüş yari düzlemde genelleştirilmiş Rayleigh dalgalarinin dispersiyonu
The influence of imperfectly bonded interfaces on the generalized Rayleigh wave dispersion in pre-stressed elastic stratified half-spaces
MASOUD NEGİN
Doktora
İngilizce
2014
İnşaat Mühendisliğiİstanbul Teknik Üniversitesiİnşaat Mühendisliği Ana Bilim Dalı
PROF. DR. MUAMMER ERTAÇ ERGÜVEN
- Investigating the effect of additives on the performance of non-stick coating films in composite structures
Kompozit yapılardaki yapışmaz kaplama filmlerinde katkı malzemelerinin performansa etkisinin incelenmesi
JABIR ISMAEILI
Doktora
İngilizce
2025
Kimya MühendisliğiEge ÜniversitesiKimya Mühendisliği Ana Bilim Dalı
PROF. DR. BİKEM ÖVEZ
- Pem yakıt hücrelerinde kompozit bipolar plakaların üretiminde grafen kullanılabilirliğinin araştırılması
Investigation of the usability of graphene use in the production of composite bipolar plates for pem fuel cells
YASİN AKIN
Doktora
Türkçe
2025
Makine MühendisliğiSakarya Uygulamalı Bilimler ÜniversitesiMakine Mühendisliği Ana Bilim Dalı
PROF. DR. İBRAHİM ÖZSERT
DOÇ. DR. HÜSEYİN KAHRAMAN
- Amorf yapılı polimerlerin nano parçacık katkılarla mekanik özelliklerinin ve çevresel gerilme çatlaması dirençlerinin iyileştirilmesi
Improvement of the mechanical properties and environmental stress cracking resistance of amorphous polymers by nanoparticle additives
DENİZ AKTAŞ
Doktora
Türkçe
2026
Polimer Bilim ve Teknolojisiİstanbul Teknik ÜniversitesiMakine Mühendisliği Ana Bilim Dalı
DOÇ. DR. HACI ABDULLAH TAŞDEMİR