Geri Dön

İnce seramik teknolojisinin dünü, bugünü, yarını

Başlık çevirisi mevcut değil.

  1. Tez No: 29380
  2. Yazar: ORHAN ÖZTÜRK
  3. Danışmanlar: PROF. DR. LALE ZOR
  4. Tez Türü: Yüksek Lisans
  5. Konular: Kimya, Chemistry
  6. Anahtar Kelimeler: Seramikler, Ceramics
  7. Yıl: 1993
  8. Dil: Türkçe
  9. Üniversite: Anadolu Üniversitesi
  10. Enstitü: Fen Bilimleri Enstitüsü
  11. Ana Bilim Dalı: Kimya Ana Bilim Dalı
  12. Bilim Dalı: Belirtilmemiş.
  13. Sayfa Sayısı: Belirtilmemiş.

Özet

VI SUMMARY The art and knowhow of ceramic -ma king had been known by man since about 7000 years. However, almost no remarkab le progress was achieved in this field, until after the industrial revolution. Since then, ceramic technology has shown an enormous development and as- a result of this fact, ceramics became preferred material in many different areas such as medicine, electronics, and textile industry etc. Today ceramic- making is more than just a muddy clay- paste cooking. Nowadays, the process of ceramic -ma king is mainly directed according to the special needs- of the consuming area. Especially technological fine ceramics must be designed to have certain thermal, electrical, mechanical properties. Thus making than suitable materials for special areas. Naturally this would mean that, the process of making fine ceramics with special properties, is a combina tion of a series of carefully controlled different steps. That is, the main ingredients, the relative rations of the se ingredients, the necessary special additives, drying, glazing, furnacing operations, must all be very carefully designed and controlled. This work aims to summarize the history, the prog ress, the present day technology and the future prospects of the fine ceramics. In order to achieve this, after a brief introduction abut the history the classification of ceramics (Chap. 1), main ingredients, additives and their properties are covered in the preceeding chapters <Chap. 2- 4). The thermal operations and glazing are handled in Chap-Vii ters 5 and 6 respectively. Technological ceramics and their uses are covered in Chapter 7. The potential uses of tech nological ceramics however, can not be limited with the few pages covered in this thesis. No doubt, specially designed new technological ceramics,wil 1 replace a number of metals, polymeric substances and steel in very near future.

Özet (Çeviri)

VI SUMMARY The art and knowhow of ceramic -ma king had been known by man since about 7000 years. However, almost no remarkab le progress was achieved in this field, until after the industrial revolution. Since then, ceramic technology has shown an enormous development and as- a result of this fact, ceramics became preferred material in many different areas such as medicine, electronics, and textile industry etc. Today ceramic- making is more than just a muddy clay- paste cooking. Nowadays, the process of ceramic -ma king is mainly directed according to the special needs- of the consuming area. Especially technological fine ceramics must be designed to have certain thermal, electrical, mechanical properties. Thus making than suitable materials for special areas. Naturally this would mean that, the process of making fine ceramics with special properties, is a combina tion of a series of carefully controlled different steps. That is, the main ingredients, the relative rations of the se ingredients, the necessary special additives, drying, glazing, furnacing operations, must all be very carefully designed and controlled. This work aims to summarize the history, the prog ress, the present day technology and the future prospects of the fine ceramics. In order to achieve this, after a brief introduction abut the history the classification of ceramics (Chap. 1), main ingredients, additives and their properties are covered in the preceeding chapters <Chap. 2- 4). The thermal operations and glazing are handled in Chap-Vii ters 5 and 6 respectively. Technological ceramics and their uses are covered in Chapter 7. The potential uses of tech nological ceramics however, can not be limited with the few pages covered in this thesis. No doubt, specially designed new technological ceramics,wil 1 replace a number of metals, polymeric substances and steel in very near future.

Benzer Tezler

  1. Tez No

    98405

    Çözgülü örme teknolojisinde piezo jakar sistemi ve kumaş üretim hesapları

    Başlık çevirisi yok

    MEHMET AKIN

    Yüksek Lisans

    Türkçe

    Türkçe

    1999

    Tekstil ve Tekstil Mühendisliğiİstanbul Teknik Üniversitesi

    DOÇ.DR. CEVZA CANDAN

  2. Tez No

    66522

    Mo-N esaslı PVD kaplamaların oksidasyon davranışları

    The oxidation behaviour of Mo-N coatings deposited on alumina by cathodic ARC PVD method

    MURAT KESİK

    Yüksek Lisans

    Türkçe

    Türkçe

    1997

    Metalurji Mühendisliğiİstanbul Teknik Üniversitesi

    Metalurji Mühendisliği Ana Bilim Dalı

    DOÇ. DR. M. KELAMİ ŞEŞEN

  3. Tez No

    46610

    AI2O3 ilavesinin Li2O-ZnO-SiO2 esaslı camların kristalizasyon ve ısıl genleşme özellikleri üzerindeki etkisi

    Başlık çevirisi yok

    NİL YILDIZ

    Yüksek Lisans

    Türkçe

    Türkçe

    1995

    Metalurji Mühendisliğiİstanbul Teknik Üniversitesi

    DOÇ.DR. ERDEM DEMİRKESEN

  4. Tez No

    26257

    Seramik sanatında Art Nouveau akımının etkileri

    Başlık çevirisi yok

    FİLİZ ÖZTÜRK

    Yüksek Lisans

    Türkçe

    Türkçe

    1993

    Güzel SanatlarMimar Sinan Güzel Sanatlar Üniversitesi

    Uygulamalı Sanatlar Ana Bilim Dalı

    PROF. BERİL ANILANMERT

  5. Tez No

    68740

    Compositional and technological characteristics of Hittite plainware ceramics from sites in the Kızılırmak Basin: A Pilot study

    Kızılırmak Havzasından Hitit dönemine ait günlük kullanım çömleklerinin yapısal ve teknolojik özellikleri: Pilot bir çalışma

    ESEN ERTEM

    Yüksek Lisans

    İngilizce

    İngilizce

    1997

    ArkeometriOrta Doğu Teknik Üniversitesi

    Arkeometri Ana Bilim Dalı

    YRD. DOÇ. DR. ŞAHİNDE DEMİRCİ

Geri Dön