Adaptive finite element analysis of elliptic partial differential equations
Başlık çevirisi mevcut değil.
- Tez No: 29070
- Danışmanlar: DOÇ. DR. VAHAN KALENDEROĞLU
- Tez Türü: Yüksek Lisans
- Konular: Makine Mühendisliği, Mechanical Engineering
- Anahtar Kelimeler: Diferensiyel denklemler, Eliptik denklemler, Sonlu elemanlar analizi, Differential equations, Elliptic equations, Finite element analysis
- Yıl: 1993
- Dil: İngilizce
- Üniversite: Boğaziçi Üniversitesi
- Enstitü: Fen Bilimleri Enstitüsü
- Ana Bilim Dalı: Makine Mühendisliği Ana Bilim Dalı
- Bilim Dalı: Belirtilmemiş.
- Sayfa Sayısı: Belirtilmemiş.
Özet
Özet yok.
Özet (Çeviri)
89 6. SUMMARY AND CONCLUSIONS The main aim of the study was to find error indicators for elliptic partial differential equations. During the study, four types of different error estimation algorithms have been adapted to the existing finite element analysis modules. All the algorithms are implemented to the existing finite element analysis modules by using FORTRAN language. It is well known that error estimation is highly problem dependent, e.g. a error estimation algorithm that is derived for parabolic systems may not give satisfactory results for elliptic systems. The resulting adaptive schemes have been examined on various elliptic problems with known and unknown analytical solutions. The convergence rates have been measured by using ||e||L and \\e\\hoo norms for the problems with known analytical solutions. The convergence rates of classical non-adaptive finite element schemes have been measured for comparison, the values are in the order of one as stated in the corresponding figures. However, if adaptive schemes are applied to the problem the convergence rates do increase up to the order of two. That means, the same quality in the error norms can be achieved with a less number of unknowns, if adaptive schemes are applied to the problem.90 Since the data structure is capable only for linear triangular elements h-type adaptive procedures have been used. However, if the capabilities of the data structure could be improved, p-type or even a combination of h- and p-types of adaptive algorithms could be implemented. Because of core storage requirements, the modules have been designed to run with direct access disk files, but this strategy surely increases the processing time. In a further study, the modules could be assembled to a single finite element program with windowing and interactive graphics capabilities.
Benzer Tezler
- Üniversal motorun sonlu elemanlar yöntemi ile magnetik alan incelemesi
Magnetic field analysis of an universal motor buy finite elements method
MEHMET CÜNEYT ÖNCÜOĞLU
Yüksek Lisans
Türkçe
1998
Elektrik ve Elektronik Mühendisliğiİstanbul Teknik ÜniversitesiElektrik Mühendisliği Ana Bilim Dalı
PROF. DR. R. NEJAT TUNÇAY
- The Design and implementation of an adaptive pre-processor and post-processor for finite element codes
Başlık çevirisi yok
SERDAR ULGER
Yüksek Lisans
İngilizce
1990
Bilgisayar Mühendisliği Bilimleri-Bilgisayar ve KontrolBoğaziçi Üniversitesi - V.32 modemin hata başarımının bilgisayar benzetimi ile incelenmesi
Performance analysis of V.32 modem
CEM KÖSE
Yüksek Lisans
Türkçe
1991
Elektrik ve Elektronik Mühendisliğiİstanbul Teknik ÜniversitesiYRD. DOÇ. DR. ÜMİT AYGÖLÜ
- Yapay sinir ağlarında öğrenme algoritmalarının analizi
Analysis of learning algorithms in neural networks
SEVİNÇ BAKLAVACI
Yüksek Lisans
Türkçe
1994
Bilgisayar Mühendisliği Bilimleri-Bilgisayar ve Kontrolİstanbul Teknik ÜniversitesiDOÇ.DR. LEYLA GÖREN
- Yakın geçmişteki nükleer reaktör dinamik analiz yöntemlerine bir bakış
Başlık çevirisi yok
MURAT ALGÜL
Yüksek Lisans
Türkçe
1996
Nükleer Mühendislikİstanbul Teknik ÜniversitesiNükleer Enerji Mühendisliği Ana Bilim Dalı
DOÇ. DR. ERDİNÇ EDGÜ