Design and implementation of an ultracapacitor test system
Bir ultrakondansatör test sisteminin tasarımı ve deneysel gerçeklenmesi
- Tez No: 269399
- Danışmanlar: YRD. DOÇ. DR. AHMET M. HAVA
- Tez Türü: Yüksek Lisans
- Konular: Elektrik ve Elektronik Mühendisliği, Electrical and Electronics Engineering
- Anahtar Kelimeler: Belirtilmemiş.
- Yıl: 2010
- Dil: İngilizce
- Üniversite: Orta Doğu Teknik Üniversitesi
- Enstitü: Fen Bilimleri Enstitüsü
- Ana Bilim Dalı: Elektrik ve Elektronik Mühendisliği Bölümü
- Bilim Dalı: Belirtilmemiş.
- Sayfa Sayısı: Belirtilmemiş.
Özet
Bu tezde, ultrakondansatörlerin (UK) temel elektriksel başarımını değerlendirmek ve parametrelerini belirlemek amacıyla bir test sistemi tasarlanmış ve deneysel olarak gerçeklenmiştir. Gerçekleştirilen UK test sistemi, güç elektroniği dönüştürücüleri tabanlı bir sistem olup, test edilecek UK'yi istenilen akım profilinde doldurabilecek ve boşaltabilecek bir sistemdir. Doldurma işlevi; AA akım şebekesi, bir alçaltıcı trafo, bir diyot köprüsü, bir DA barası kondansatörü ve bir alçaltıcı DA-DA dönüştürücüsünden oluşan yapı aracılığıyla sağlanmaktadır. Doldurma işlevi sonucunda test edilen UK üzerinde depolanan enerji ise bir yükseltici DA-DA dönüştürücüsü ve bir DA kıyıcı yapısı kullanılarak bir direnç grubu üzerine boşaltılmaktadır. Doldurma ve boşaltma işlevleri gerçekleştirilirken, test edilen UK'ye uygulanan akım güç elektroniği dönüştürücülerinin akım kontrollü olarak denetlenmesiyle sağlanmaktadır. Test sistemininde yer alan güç elektroniği dönüştürücülerinin denetimi ile doldurma ve boşaltma fazları arasındaki geçişler mikrodenetleyici destekli bir donanım yapısı aracılığıyla gerçekleştirilmiştir. Tez çalışması kapsamında beş adet UK hücresinin seri bağlanmasıyla bir UK modülü oluşturulmuş ve bu UK modülü, UK test sistemi vasıtasıyla sabit akımda ve sabit güçte doldurma ve boşaltma testlerine tabi tutulmuştur. Gerçekleştirilen UK test sisteminin başarımı bilgisayar benzetimleri yardımıyla ve deneysel olarak incelenmiştir. UK modülünün temel elektriksel davranışı deneysel olarak gözlemlenmiş ve elektriksel parametreleri deneysel olarak çıkarılmıştır.
Özet (Çeviri)
In this thesis, a test system is designed and implemented in order to evaluate the basic electrical performance and determine the parameters of ultracapacitors (UC). The implemented UC test system is based on power electronics converters and it is capable of charging and discharging the UC under test with predetermined current profiles. The charging operation is provided by a configuration involving the AC utility grid, a step-down transformer, a diode bridge, and a DC bus filter capacitor followed by a step-down DC-DC converter. The energy stored in the UC under test, as a result of the charging operation, is discharged to a resistor bank through a step-up DC-DC converter and a DC chopper structure. The charging and discharging current applied to the UC under test is provided by means of current mode control of power electronics converters. The control mechanism of the power electronics converters and the transition operations between the charging and discharging phases of the test system is realized via a microcontroller supported hardware structure. In the scope of the thesis study, a UC module composed of five serially connected UC cells is constructed. Constant current and constant power tests are applied to the constructed UC module. The performance of the implemented UC test system is investigated by means of computer simulations and experimental results. Further, basic electrical behaviour of the constructed UC module is evaluated and the parameters are extracted experimentally.
Benzer Tezler
- Elektrikli araçlar için modüler enerji yönetim sistemi tasarlanması ve gerçeklenmesi
Design and implementation of modular energy management system for electric vehicles
AKİF DEMİRÇALI
Doktora
Türkçe
2021
Elektrik ve Elektronik MühendisliğiPamukkale ÜniversitesiElektrik-Elektronik Mühendisliği Ana Bilim Dalı
DOÇ. DR. SELİM KÖROĞLU
- New possibilities in the design of CMOS frequency agile filters
Frekans atik süzgeçlerin tasarımında yeni olanaklar
ERSİN ALAYBEYOĞLU
Doktora
İngilizce
2017
Elektrik ve Elektronik Mühendisliğiİstanbul Teknik ÜniversitesiElektronik ve Haberleşme Mühendisliği Ana Bilim Dalı
PROF. DR. HULUSİ HAKAN KUNTMAN
- Hibrit enerji depolama sistemli elektrikli araçlar için çift yönlü da-da dönüştürücü tasarımı ve gerçekleştirilmesi
Design and implementation of bidirectional da-da converter for electric cars with hybrid energy storage system
ADEM ERGÜN
Yüksek Lisans
Türkçe
2014
Elektrik ve Elektronik MühendisliğiGazi ÜniversitesiElektrik ve Elektronik Mühendisliği Bölümü
DOÇ. DR. MEHMET TİMUR AYDEMİR
- Design and implementation of an automated examination system
Başlık çevirisi yok
MUSTAFA TÜTÜNCÜ
Yüksek Lisans
İngilizce
1987
Bilgisayar Mühendisliği Bilimleri-Bilgisayar ve KontrolOrta Doğu Teknik ÜniversitesiBilgisayar Mühendisliği Ana Bilim Dalı
Y.DOÇ.DR. BÜLENT EPİR
- Design and implementation of an ECB-BUS compatible FDC board
Başlık çevirisi yok
M.ORHUN ARKUT
Yüksek Lisans
İngilizce
1987
Elektrik ve Elektronik MühendisliğiOrta Doğu Teknik ÜniversitesiDOÇ. DR. HAYRETTİN KÖYMEN