Geri Dön

Preparation of copper(II) and pH optical sensor films based on immobilized reagents and investigation of their performance

İmmobilize reaktiflerle pH ve bakır(II) iyonlarına duyar optik sensör filmlerinin hazırlanması ve performanslarının saptanması

  1. Tez No: 256865
  2. Yazar: RAHİME TOPARLAK
  3. Danışmanlar: PROF. DR. BERRİN YENİGÜL
  4. Tez Türü: Yüksek Lisans
  5. Konular: Kimya, Chemistry
  6. Anahtar Kelimeler: Bakır (II) iyonu, Etil selüloz, Flüoresan spektroskopisi, Hidrojen iyon konsantrasyonu, Optik sensörler, PVC, Copper (II) ion, Ethyle cellulose, Fluorescence spectroscopy, Hydrogen-ion concentration, Optical sensors, PVC
  7. Yıl: 2009
  8. Dil: İngilizce
  9. Üniversite: Ege Üniversitesi
  10. Enstitü: Fen Bilimleri Enstitüsü
  11. Ana Bilim Dalı: Kimya Ana Bilim Dalı
  12. Bilim Dalı: Belirtilmemiş.
  13. Sayfa Sayısı: Belirtilmemiş.

Özet

Bu çalışmanın birinci bölümünde, sensör tanımı ve sınıflandırılması yapılarak, sensörlerin avantaj ve dezavantajları açıklanmıştır. Sensör teknolojisinde kullanılan indikatörler, polimerler ve immobilizasyon yöntemleri anlatılmıştır.Çalışmanın ikinci bölümünde, kullanılan cihazlar, kimyasal reaktifler gibi deneysel parametreler üzerinde durulmuştur. Sensör film hazırlama yöntemleri açıklanmıştır.Çalışmanın üçüncü bölümünde, yeni sentezlenen 2- amino-5-klorobenzofenon-S-metil tiyosemikarbazon (LH) PVC membrana immobilize edilerek Cu(II) iyonuna duyar ve seçimli optik sensör geliştirilmiştir. LH ligantının üç farklı çözgen ve PVC matriksdeki fotofiziksel ve fotokimyasal özellikleri araştırılmıştır. Sensörün ortalama yanıt süresinin 5 dakika olduğu, 1.0 x 10-6 ? 1.0 x 10-3 M aralığında Cu(II)'e doğrusal yanıt verdiği saptanmıştır. Çalışma dalga boyunda diğer metallerin girişim yapmadığı tespit edilmiştir. Memran pH' a da duyar olduğu için Cu(II) tayini pH = 7.0 da tamponlanmış çözeltide yapılmalıdır.Çalışmanın dördüncü bölümünde, 2- amino-5-klorobenzofenon-S-metil tiyosemikarbazon (LH) PVC membrana immobilize edilerek optik pH sensörü geliştirilmiştir. Optik pH sensörü pH 2-9 aralığında kullanılabilmektedir. PVC matriksde boyanın pKa değeri fluoresans spektrumundan 6.02 olarak bulunmuştur. Sensörün yanıtlama zamanı yaklaşık 4 dakika olarak ölçülmüştür. Sensörün proton iyonlarına karşı yanıtı tersinmez olduğu için, sensör tek kullanımlık sensör olarak kullanılabilir.

Özet (Çeviri)

In the first chapter of this study, definition and classification of the sensors were made and their advantages and disadvantages were given. The indicators and polymers used in sensors were given and immobilization techniques used in sensor technology were explained.The second part of the thesis is about experimental. In this section apparatus and chemicals used in this study were given and procedure of the sensor film preparation was given.In the third chapter of this study, sensitive and selective determination of Cu(II) was accomplished by making use of the new synthesized thiosemicarbazone derivative, immobilized in a plasticized PVC membrane. The photophycial and photochemical characteristics of newly synthesized thiosemicarbazone derivative 2-amino-5-chlorobenzophenone-S-methyl- thiosemicarbazone (LH) in three different solvents and plasticized PVC matrix were determined. The membrane responds to Cu2+ by changing fluorescence intensity reversibly at 450 nm when excited at 375 nm, and is sensitive to Cu2+ in the 1.0 x 10-6 ? 1.0 x 10-3 M range for an average exposure time of 5 min. No response at the working wavelength was observed from other potential heavy metal interferents. It has a reproducible response and provides an inexpensive and quick method for the determination of Cu2+. The membranes are sensitive to pH as well, and the determination of Cu(II) must be performed in buffered solution, ideally at pH 7.0.In the fourth part of the study, an optical pH sensor was developed using immobilized 2-amino-5-chlorobenzophenone-S-methyl- thiosemicarbazone (LH) dye in plasticized PVC matrix. Optical pH sensor can be used in the range of pH 2-9. pKa value of dye in PVC matrix, calculated from fluorescence spectra, is found to be 6.02. The approximate response time was measured as 4 min. Because the sensor response was irreversible to proton ions, it can be used as disposable sensor.

Benzer Tezler

  1. Development of new optical sensors for metal ion sensing

    Metal iyonu duyar optik sensör geliştirilmesi

    NUR AKSUNER

    Doktora

    İngilizce

    İngilizce

    2008

    KimyaEge Üniversitesi

    Kimya Bölümü

    PROF. DR. EMÜR HENDEN

  2. Alkil ftalodinitril türevlerinin sentezi ve ftalosiyaninlerinin hazırlanması

    Synthesis of the alkylphthalodinitrile derivatives and phthalocyanines

    HATİCE AKIN DİNÇER

    Doktora

    Türkçe

    Türkçe

    2005

    Kimyaİstanbul Teknik Üniversitesi

    DOÇ.DR. ESİN HAMURYUDAN

    PROF.DR. MAKBULE BURKUT KOÇAK

  3. 2,4,6-tris[amino-hekza(hekziltiyo)ftalosiyanin]-s-triazin sentezi ve özelliklerinin incelenmesi

    Synthesis and characterization of 2,4,6-tris[amino-hexa(hexylthio)phthalocyanine]-s-triazine

    NAZAN OZAN

    Doktora

    Türkçe

    Türkçe

    2000

    Kimyaİstanbul Teknik Üniversitesi

    PROF.DR. ÖZER BEKAROĞLU

  4. Yeni bir çözünür ftalosiyanın sentezi

    Synthesis of a new soluble phthalocyanine

    SERAP GÜNDÜZ

    Yüksek Lisans

    Türkçe

    Türkçe

    1992

    Kimyaİstanbul Teknik Üniversitesi

    PROF. DR. AHMET GÜL

  5. Poliakrilamid-bakır-protein üçlü komplekslerinin oluşumu ve fizikokimyasal özellikleri

    The Formation of ternary polyacrylamide-copper-protein coplexes and their physicochemical properties

    CEMAL ÖZEROĞLU

    Doktora

    Türkçe

    Türkçe

    1994

    Kimyaİstanbul Teknik Üniversitesi

    PROF.DR. A. SEZAİ SARAÇ