Su bazlı vernik uygulanmış yüzey üzerindeki ısıl işlemin etkileri
Based on surface water varnish was applied to the heat treatment effect of
- Tez No: 237918
- Danışmanlar: YRD. DOÇ. DR. MURAT ÖZALP
- Tez Türü: Yüksek Lisans
- Konular: Teknik Eğitim, Ağaç İşleri, Technical Education, Wood Products
- Anahtar Kelimeler: Isıl işlem, Parlaklık, Sertlik direnci, Su bazlı vernik, Yapışma direnci, Heat treatment, Brightness, Adhesive resistance, Water based varnish, Hardness
- Yıl: 2009
- Dil: Türkçe
- Üniversite: Dumlupınar Üniversitesi
- Enstitü: Fen Bilimleri Enstitüsü
- Ana Bilim Dalı: Mobilya ve Dekorasyon Eğitimi Ana Bilim Dalı
- Bilim Dalı: Belirtilmemiş.
- Sayfa Sayısı: Belirtilmemiş.
Özet
Ahşap en önemli yapı malzemelerinden birisidir. Ağaç malzemeyi önemli kılan özelliklerinin başında onun, higroskopik, anizotrop ve organik yapıda oluşu gelmektedir. Mamul olarak kullanılan ağaç birçok durumda dış etkilere karşı korunmada tek başına yetersiz kaldığından ekonomik ömrünün uzatılabilmesi için uygun koruma uygun tekniklerinin uygulanması gerekir. Bu araştırmada, ağaç malzemeye uygulanan ısıl işlemin verniklerin sertlik, parlaklık ve yüzeye yapışma direncine etkileri incelenmiştir. Bu amaçla ilk olarak Sarıçam (Pinus sylvestris L.), Doğu Kayını (Fagus orientalis L.) ve Kestane (Castanea sativa M.) ağacından elde edilen deney örnekleri su bazlı vernikler ile verniklemiş sonra 100, 125 ve 150 ?C sıcaklıkta 2, 4 ve 6 saat süre ile bekletilmişlerdir.Araştırma sonuçlarına göre 100 °C'de 2 saat ısıl işleme tabi tutulan tüm numunelerin yapışma direnci ve parlaklık değerlerinde iyileşmeler görülürken 100 °C'de 4, 6 saat 125 °C ve 150 °C'de 2, 4, 6 saat ısıl işleme tabi tutulan numunelerde olumsuzluklar tespit edilmiştir. Ayrıca 100 °C, 125 °C ve 150 °C'de 2, 4, 6 saat ısıl işleme tabi tutulan tüm numunelerin sertlik değerlerinin yüksek olduğu tespit edilmiştir.Uygulama yapılan ağaç türlerinin hepsinde çift kompenantlı verniğin tek kompenantlı verniğe göre daha üstün olduğu görülmüştür.
Özet (Çeviri)
Wooden is one of the most important construction materials. Being hygroscopic, anisotropic and organic forms are the important characteristics for a wood material. Wooden is weak against the external effects. So, it is necessary to apply proper protection techniques to improve its economic life. In this study, the effects of the heat treatment of wooden materials on hardness, brightness and adhesive resistance of varnishes were investigated. For this purpose, firstly Pinus sylvestris L., Fagus orientalis L. and Castanea sativa M. wooden samples were varnished by the water based varnish and after that they were kept in temperatures of 100 °C, 125 °C and 150 °C for times of 2, 4 and 6 hours.According to test results it was determined that while the hardness and adhesive resistance were improved for all samples which were processed 2 hours in temperatures of 100 °C, the brightness adhesive resistance and brightness of the samples which were processed 4 and 6 hours in 100 °C and 2, 4 and 6 hours in 125 °C and 150 °C were deteriorated. Furthermore, it was observed that the hardness resistance of all samples which processed for 2, 4 and 6 hours in 100 °C, 125 °C and 150 °C were high.In the experimental applications of the whole wood species are seen couple component varnish according to single component varnish which is highest grade values.
Benzer Tezler
- Applying different surface treatments on different plastic materials, examining the effect on paint test performance and developing a high-performance painting process
Farklı plastik malzemelere farklı yüzey işlemleri uygulaması, boya test performansına etkisi incelenmesi ve yüksek performanslı bir boya prosesi geliştirilmesi
ELİF BURCU ÇETİN
Yüksek Lisans
İngilizce
2022
Polimer Bilim ve Teknolojisiİstanbul Teknik ÜniversitesiPolimer Bilim ve Teknolojisi Ana Bilim Dalı
PROF. DR. NİLGÜN KIZILCAN
- Mimoza (Acacia mollissima) ve kebrako (Schinopsis lorentzii) tanenleri ile emprenye edilen ahşap malzemelerin üst yüzey işlemlerine uygunluklarının araştırılması
Investigation of the suitability to the surface treatment of wood materials impregnated with mimosa (Acacia mollissima) and quebracho (Schinopsis lorentzii) tannins
HEDİYE CEYLAN
Yüksek Lisans
Türkçe
2016
Ağaç İşleriDüzce ÜniversitesiOrman Endüstri Mühendisliği Ana Bilim Dalı
YRD. DOÇ. DR. MESUT YALÇIN
- Isıl işlem uygulanmış ağaç malzemede yüzey pürüzlülüğünün vernik katmanı tutunma direncine etkisi
The effect of surface roughness on the adhesion resistance of the varnish layer in heat-treated wood material
SÜLEYMAN TÜRKDAL
Yüksek Lisans
Türkçe
2024
Ağaç İşleriGazi ÜniversitesiAğaç İşleri Endüstri Mühendisliği Ana Bilim Dalı
PROF. DR. CEVDET SÖĞÜTLÜ
- Nanoparçacıklar ile modifiye edilmiş su bazlı verniklerin ısıl işlem uygulanmış bazı ağaç malzemelerde uv yaşlandırma etkisine karşı direncinin belirlenmesi
Resistance properties of water-based varnishes modified with nanoparticles against the aging effect of uv on surface of some thermo-wood materials
MEHMET KARAMANOĞLU
Doktora
Türkçe
2020
Ağaç İşleriKastamonu ÜniversitesiOrman Endüstri Mühendisliği Ana Bilim Dalı
DR. ÖĞR. ÜYESİ HACİ İSMAİL KESİK
- Yoğunlaştırma ve ısıl işlemin doğu kayını ve sarıçamın bazı teknolojik özellikleriyle üstyüzey işlemlerine etkisi
The effects of densification and heat treatment to finishing process with some technological properties of eastern beech and scots pine
HÜSEYİN PELİT
Doktora
Türkçe
2014
Ağaç İşleriGazi ÜniversitesiMobilya ve Dekorasyon Eğitimi Ana Bilim Dalı
PROF. DR. ABDULLAH SÖNMEZ