Coğrafi veri sistemlerinin riper seçimi işleminde uygulanması
Başlık çevirisi mevcut değil.
- Tez No: 23688
- Danışmanlar: YRD. DOÇ. DR. CAN AYDAY
- Tez Türü: Yüksek Lisans
- Konular: Maden Mühendisliği ve Madencilik, Mining Engineering and Mining
- Anahtar Kelimeler: Coğrafi veri sistemleri, Madencilik, Riper, Geographical data systems, Mining, Ripper
- Yıl: 1992
- Dil: Türkçe
- Üniversite: Anadolu Üniversitesi
- Enstitü: Fen Bilimleri Enstitüsü
- Ana Bilim Dalı: Maden Mühendisliği Ana Bilim Dalı
- Bilim Dalı: Belirtilmemiş.
- Sayfa Sayısı: Belirtilmemiş.
Özet
IV ÖZET Bir ülkenin ekonomik düzeyini belirleyen en önemli faktörlerden biri“yeraltı zenginlikleri”dir. Cevherin yeraltından çıkarılması işlemi, yeraltı işletme yöntemleri veya açık ocak işletme yöntemleri uygulanarak yapılabilir. Her iki üretim sisteminde de amaç, cevherin en ekonomik şekilde piyasaya sunulmasıdır. Açık ocak işletmeciliğinde örtü tabakasının kaldırılması (dekapaj) çalışmalarında riperleme işleminin önemi büyüktür. Ancak yüzeyin değişik litolojik birimlerden oluşması ve mühendislik özelliklerinin her bölge için farklılık göstermesi, değişik kapasiteli riper tiplerinin üretilmesine ve her birim için uygun riperin kullanılmasına yol açmıştır. Bu çalışmada, GLl Tunçbilek Linyit İşletmesi Beye Sahası'nm bir bölümü için yapılan saha çalışmaları ışığında coğrafi veri sistemleri kullanılarak riper tayini yapılmıştır. Dekapaj işleminde kullanılması gereken ripler tipleri, Müftüoğlu- Scoble ve Singh-Denby-Eğretli puanlama sistemlerine göre saptanmış, her iki sistemin karşılaştırmaları yapılmıştır.
Özet (Çeviri)
SUMMARY It is well known that the mineral reserves of a country is one of the most important parameters in the determination of its economic level. The production of ores from the area of ore bodies can be realised either by open pit method or by underground methods. In both methods the aim is to get and then transport the ore from the production area. The most costly part of open pit mining method is the removal of oveburden. Blasting and ripping are the main methods used for the loosening of overburden layers. Blasting is usvally preferred in hard to very-hard rock formations. Ripping is applied to a range of rocks from very weak to medium hardness. Thus ripper selection due to the hardness of the formations is a critical stage of mine planning. In this study, ripper selection of an excavation panel of G.L.Î. enterprises have been realised by using Geographical Information Systems. The classification of the formations have been done by using two diggabilitiy classification systems, namely Müftüoğlu-Scoble diggabilitiy classification systems and Singh et al.,rippability classification systems. Finally both methods have been compared in wiev of the obtained results.
Benzer Tezler
- Sayısal haritaların coğrafi bilgi sistemlerinde kullanılması ve kordinat transformasyonu
The usage of digital maps in geographical information systems and coordinate transformation
HÜSEYİN KURŞUN
Yüksek Lisans
Türkçe
1997
Jeodezi ve Fotogrametriİstanbul Teknik ÜniversitesiJeodezi ve Fotogrametri Ana Bilim Dalı
DOÇ. DR. YUNUS KALKAN
- Web-based knwledge management systems: A field study of MORN in research and development project management
Web tabanlı bilgi yönetim sistemleri: Ar-Ge proje yönetiminde MORN uygulaması
İSMAİL METE ÖZKAN
Yüksek Lisans
İngilizce
1999
Bilgisayar Mühendisliği Bilimleri-Bilgisayar ve KontrolYeditepe ÜniversitesiSistem Mühendisliği Ana Bilim Dalı
PROF. DR. LİNET ÖZDAMAR
- Coğrafi veri tabanı güncelleştirmesine yönelik coğrafi bilgi sistemi tasarımı ve uygulaması
An Aplication and design of a geographic information system for updating of a geographic database
H. HAKAN MARAŞ
- Bilgisayar destekli tasarım ve veri tabanı yönetim sistemi entegrasyonu ile bilgi sistemlerinin oluşturulması, analizi ve işletilmesi
Başlık çevirisi yok
MEHMET MERT
Yüksek Lisans
Türkçe
1998
Uçak Mühendisliğiİstanbul Teknik ÜniversitesiUçak Mühendisliği Ana Bilim Dalı
DOÇ. DR. MUAMMER KALYON