Polimer elektrolit membranlı yakıt pilleri için katot üretimi
Cathode production for polymer electrolyte membrane fuel cells
- Tez No: 222721
- Danışmanlar: PROF.DR. İ. SERVET TİMUR
- Tez Türü: Yüksek Lisans
- Konular: Metalurji Mühendisliği, Metallurgical Engineering
- Anahtar Kelimeler: PEMYP, Katot, Anodik Oksidasyon, PEMFC, Cathode, Anodic Oxidation
- Yıl: 2007
- Dil: Türkçe
- Üniversite: İstanbul Teknik Üniversitesi
- Enstitü: Fen Bilimleri Enstitüsü
- Ana Bilim Dalı: Metalurji ve Malzeme Mühendisliği Ana Bilim Dalı
- Bilim Dalı: Üretim Metalurjisi ve Teknolojileri Mühendisliği Bilim Dalı
- Sayfa Sayısı: Belirtilmemiş.
Özet
Yakıt pilleri, temiz, çevreye zarar vermeyen ve yüksek verime sahip enerji dönüsüm sistemleri olmaları sebebiyle alternatif enerji üretim yöntemleri arasında önemli bir yere sahiptirler. Yakıttaki kimyasal enerjiyi herhangi bir dönüsüm gerekmeksizin elektrik enerjisine yüksek verimle dönüstürürler ve çevre kirliligine neden olmazlar. Katı oksitli yakıt pillerinde elektrot olarak pek çok oksit filmi (Ni-YSZ, Ni-GDC, LSM, (La, Sr)CoO3 gibi) kullanılabilir. Ayrıca bu elektrotlar sol-jel, PVD, katı hal sinterlemesi, serit döküm gibi birçok farklı üretim teknigiyle üretilebilirler. Buna ragmen, polimer elektrolit membranlı yakıt pillerinde elektrotlar sadece platin ve karbon ile sınırlandırılmıstır. Bu çalısmada hedef katı oksitli yakıt pillerinde kullanılan oksit tipli elektrotların polimer elektrolit membranlı yakıt pillerinde kullanılmak üzere üretilmesidir. Bu elektrotlar d-orbital metal iyonlarından (Co2+, Rh3+, Ag+) elektrokimyasal biriktirme yoluyla üretilmistir. Yüksek elektrokatalitik aktiviteye sahip olması beklenen bu metal oksit yapıların katodik yükleme altındaki davranısları incelenmistir. Anodik oksidasyon yöntemiyle elde edilen stokiometrik olmayan yapıdaki kobalt oksit, rodyum oksit ve gümüs oksit kaplı elektrotların 0,1 M H2SO4 derisimine sahip çözeltide altlık metal kursundan daha elektronegatif katot polarizasyonu degerlerine sahip oldukları belirlenmistir.
Özet (Çeviri)
Fuel cells have an important place among alternative energy production methods since they produce clean, emission free energy with high efficiency. They convert chemical energy of fuels directly into electrical energy with high efficiency and without causing any air pollution. In solid oxide fuel cells many kinds of oxide films such as Ni-YSZ (Ni- Yttria stabilized zirconia), Ni-GDC (Ni- Gadolinium-doped ceria), LSM (Lanthanum strontium manganite), (La,Sr)CoO3 and etc. can be used as electrodes of the system. Also, there is a variety in production methods of these electrodes such as sol-gel, tape casting, solid-state reaction, PVD, etc. On the other hand, the electrodes of polymer electrolyte membrane fuel cells are limited only with platinum and carbon. In this study, the aim is to try to produce and use suitable oxide-type electrodes, which are generally used in SOFCs, in PEM fuel cells. The electrodes are produced by electrochemical deposition techniques, via the deposition of the oxide form of d-orbital type metal ions (Co2+, Rh3+, Ag+) from the electrolyte to the anode surface. These electrodes, aimed to be having high electrocatalytic properties are tested under cathodic polarization. Results are compared with values obtained from substrate metal lead and platinum under same conditions. It is obtained that nonstochiometric cobalt oxide, rhodium oxide and silver oxide electrodes deposited by anodic oxidation method have more electronegative cathode polarization values than the substrate metal lead in 0,1 M H2SO4 solution.
Benzer Tezler
- Yakıt pillerinin teknik ve ekonomik açıdan incelenmesi ve uygulama örnekleri
Technical and economical analysis and applications of fuel cells
SEMİH ÖZEL
Yüksek Lisans
Türkçe
2003
Elektrik ve Elektronik MühendisliğiMarmara ÜniversitesiElektrik Eğitimi Ana Bilim Dalı
PROF. DR. İRFAN GÜNEY
- Metanolle çalışan yakıt pilleri için metanolle reaksiyon vermeyen oksijen reduksiyon katalizörünün geliştirilmesi
Development of methanol tolerant oxygen reduction catalysts for direct methanol fuel cells
SİBEL SARI
- Polimer elektrolit membranlı yakıt pilleri için anot üretimi
Anode production for polymer electrolyte membrane fuel cells
BUKET YILMAZ
Yüksek Lisans
Türkçe
2006
Metalurji Mühendisliğiİstanbul Teknik ÜniversitesiMetalurji ve Malzeme Mühendisliği Ana Bilim Dalı
PROF.DR. İ. YILMAZ TAPTIK
- Synthesis and proton conductivity studies of azole-modified poly(glycidyl methacrylate)
Azol fonksiyonlu poli(glisidil metakrilat) sentezi ve proton iletkenlik çalışması
SEVİM ÜNÜGÜR ÇELİK
Yüksek Lisans
İngilizce
2008
Polimer Bilim ve TeknolojisiFatih ÜniversitesiKimya Bölümü
DOÇ. DR. AYHAN BOZKURT