Geri Dön

Ömerler yeraltı kömür ocağında tam mekanize üretimde oluşan kayıpların belirlenmesi ve azaltılması üzerine araştırmalar

Investigations on determining and decreasing the coal loss at fully-mechanized production in Omerler underground coal mine

  1. Tez No: 213164
  2. Yazar: M. KEMAL ÖZFIRAT
  3. Danışmanlar: DOÇ.DR. FERHAN ŞİMŞİR
  4. Tez Türü: Doktora
  5. Konular: Maden Mühendisliği ve Madencilik, Mining Engineering and Mining
  6. Anahtar Kelimeler: Benzetim, Yer altı madenciliği, Underground mine, Coal loss, Fully-mechanized production, Physical model, Simulation, Underground mining
  7. Yıl: 2007
  8. Dil: Türkçe
  9. Üniversite: Dokuz Eylül Üniversitesi
  10. Enstitü: Fen Bilimleri Enstitüsü
  11. Ana Bilim Dalı: Maden Mühendisliği Ana Bilim Dalı
  12. Bilim Dalı: Belirtilmemiş.
  13. Sayfa Sayısı: Belirtilmemiş.

Özet

Özet yok.

Özet (Çeviri)

TKİ -GL Ömerler colliery is a fully-mechanized underground lignite mine at Tunçbilek region. The thickness of the coal seam is 8,5 meters on the average. 3 m from the base is operated by a longwall, 5,5 m is produced by caving in from the roof support frame. Caving method is an easy method in terms of operation organization. However, coal losses appear during the caving operation. Coal loss is an undesirable situation since it is a loss of national resource and it increases the risk of spontaneous combustion, also. The main idea of this PhD thesis is to find coal loss values during operation and to do research on how to decrease the loss values. In order to find the coal loss, firstly, experiments are carried out in M4 and M5 panels of the mine. These studies revealed that 24,73% of top coal and 16,64% of total reserve is left behind the face during caving operation of top coal from the roof support window. In order to examine the coal loss values in Ömerler mine, a physical model of the mine is designed. Physical models of 1/10 and 1/20 geometric scale are built and experiments are performed to figure out the coal loss in the rear of the face.Then, some modifications are made on the physical model in order to investigate how to decrease coal loss in the mine and experiments are made to find out the changes in the loss values. According to the results achieved, enlarging roof support frame and usage of rear face conveyor would decrease coal loss. Computer simulation of the mine operation is done by ARENA 2.2 simulation software. The coal loss values found in the previous experiments are employed in this simulation model. By the use of model, face production values, equipment selection, and the number of shearer loader cuts are found.

Benzer Tezler

  1. Orta ve Batı Anadolu'da tam mekanize kömür madenlerinde üretim kayıplarının teknik ve ekonomik açıdan irdelenmesi

    Investigation of production losses occuring at the fully mechanized coal mines in the Middle and West Anatolia from mechanical and economic point of views

    F. EMRAH SAKARYA

    Yüksek Lisans

    Türkçe

    Türkçe

    2001

    Maden Mühendisliği ve MadencilikDokuz Eylül Üniversitesi

    Maden Mühendisliği Ana Bilim Dalı

    DOÇ. DR. FERHAN ŞİMŞİR

  2. Kütahya-Tunçbilek-Ömerler Kömür Ocağında çalışan işçilerde bazı tümör marker düzeylerinin değerlendirilmesi

    Başlık çevirisi yok

    FATMA GÜNDOĞAN

    Yüksek Lisans

    Türkçe

    Türkçe

    1996

    BiyolojiDumlupınar Üniversitesi

    Biyoloji Ana Bilim Dalı

    YRD. DOÇ. DR. MUSTAFA YÖNTEM

  3. Tali havalandırma tasarımında etkili faktörlerin belirlenmesi

    The determinatin of effective parameters in the design of auxiliary ventilation

    ERKAN ÇEVİK

    Yüksek Lisans

    Türkçe

    Türkçe

    2006

    Maden Mühendisliği ve MadencilikEskişehir Osmangazi Üniversitesi

    Maden Mühendisliği Ana Bilim Dalı

    YRD. DOÇ. DR. MUSTAFA ÖNDER

  4. Measurement and evaluation of loads and convergences in underground coal mines with regard to roaf control

    Yeraltı kömür işlletmelerindeki tavan kontroluna yönelik yük ve konverjansın ölçümü ve değerlendirilmesi

    GÜRCAN KONAK

    Doktora

    İngilizce

    İngilizce

    1995

    Maden Mühendisliği ve MadencilikDokuz Eylül Üniversitesi

    Maden Mühendisliği Ana Bilim Dalı

    PROF. DR. HALİL KÖSE