Aerodynamic analysis of a paraglider wing using domain decomposition techniques
Yamaç paraşütü kanadının alan ayrıştırma teknikleri kullanılarak aerodinamik analizi
- Tez No: 200267
- Danışmanlar: Y.DOÇ.DR. ALİ ECDER
- Tez Türü: Yüksek Lisans
- Konular: Makine Mühendisliği, Mechanical Engineering
- Anahtar Kelimeler: Newton yöntemi, Newton method
- Yıl: 2007
- Dil: İngilizce
- Üniversite: Boğaziçi Üniversitesi
- Enstitü: Fen Bilimleri Enstitüsü
- Ana Bilim Dalı: Makine Mühendisliği Ana Bilim Dalı
- Bilim Dalı: Belirtilmemiş.
- Sayfa Sayısı: Belirtilmemiş.
Özet
Özet yok.
Özet (Çeviri)
The flow around a curvature tube is investigated using it as a simple 2D model of a paraglider wing based on the similarity between their top views. The solutions are obtained for ¯ve di®erent angle of attacks varying from 00 up to 420, for two di®erent radius of curvatures and for two di®erent Reynolds number namely for Re=80 and for Re=160. Two non-matching overlapping domains are used. The flow at these domains is solved separately and the solutions are transferred into each other using the alternating multiplicative Schwarz technique. With the aid of this technique a solver is developed which is capable of solving the flow around various forms of the tube and at di®erent angle of attacks without making any modi¯cations in the outer boundaries and without using grid generation. Newton's methods combined with three di®erent Krylov sub-space solvers are applied. Implementing also Jacobi, symmetric Gauss-Seidel (SGS) and incomplete LU decomposition (ILU(0)) preconditioners into the solvers their e®ects on the convergence behavior are investigated. It is observed that the ILU(0) has a superior e®ect on the convergence behavior than the others have. However, its unavailability for the matrix free algorithms makes SGS preconditioned inexact Newton's method a better option as a solver because of its low storage load and low code development period.
Benzer Tezler
- Aerodynamic analysis of a full aircraft configuration using a panel method
Panel metot kullanılarak tüm bir uçak konfigürasyonunun aerodinamik analizi
DİLEK FUNDA KURTULUŞ
Yüksek Lisans
İngilizce
2002
Havacılık ve Uzay MühendisliğiOrta Doğu Teknik ÜniversitesiHavacılık Mühendisliği Ana Bilim Dalı
PROF. DR. NAFİZ ALEMDAROĞLU
DOÇ. DR. YUSUF ÖZYÖRÜK
- Unsteady Aerodynamic analysis of a wind turbine forces
bir rüzgar türbinine gelen kuvvetlerin zamana bağlı incelenmesi
NAZANIN YEKKALAM LARY
Yüksek Lisans
İngilizce
2018
Makine Mühendisliğiİzmir Yüksek Teknoloji EnstitüsüMakine Mühendisliği Ana Bilim Dalı
Assoc. Prof. Dr. ÜNVER ÖZKOL
- Aerodynamic and three-degree-of-freedom flight mechanics analysis of a slender body of rectangular cross section
Dikdörtgen kesitli ince uzun bir gövdenin aerodinamik ve 3 serbestlik dereceli uçuş mekaniği analizi
BAHRİ TUĞCAN SELİMHOCAOĞLU
Yüksek Lisans
İngilizce
2014
Havacılık ve Uzay MühendisliğiOrta Doğu Teknik ÜniversitesiHavacılık ve Uzay Mühendisliği Ana Bilim Dalı
PROF. DR. YUSUF ÖZYÖRÜK
PROF. DR. HÜSEYİN NAFİZ ALEMDAROĞLU
- Three dimensional aerodynamic analysis of missiles by a panel method
Füzelerin bir panel yöntemiyle üç boyutlu aerodinamik incelemeleri
OSMAN BAŞOĞLU
Yüksek Lisans
İngilizce
2002
Havacılık ve Uzay MühendisliğiOrta Doğu Teknik ÜniversitesiHavacılık Mühendisliği Ana Bilim Dalı
DOÇ. DR. YUSUF ÖZYÖRÜK
- Thin layer navier stokes analysis of complex aerodynamic configurations using a zonal solver
Karmaşık aerodinamik yapılarının çok bloklu bir çözücü kullanılarak ince tabaka navier-stokes analizleri
BEYTULLAH TEMEL
Yüksek Lisans
İngilizce
1995
Uçak MühendisliğiOrta Doğu Teknik ÜniversitesiDOÇ.DR. M. CEVDET ÇELENLİGİL
DOÇ.DR. MEHMET ŞERİF KAVSAOĞLU