Geri Dön

Modeling and control of the coordinated motion of a group of autonomous mobile robots

Bir grup otonom mobil robotun koordineli hareketinin modellenmesi ve kontrolü

  1. Tez No: 197639
  2. Yazar: NUSRETTİN GÜLEÇ
  3. Danışmanlar: DOÇ. DR. MUSTAFA ÜNEL, PROF. DR. ASİF SABANOVİC
  4. Tez Türü: Yüksek Lisans
  5. Konular: Bilim ve Teknoloji, Elektrik ve Elektronik Mühendisliği, Mühendislik Bilimleri, Science and Technology, Electrical and Electronics Engineering, Engineering Sciences
  6. Anahtar Kelimeler: Belirtilmemiş.
  7. Yıl: 2005
  8. Dil: İngilizce
  9. Üniversite: Sabancı Üniversitesi
  10. Enstitü: Mühendislik ve Fen Bilimleri Enstitüsü
  11. Ana Bilim Dalı: Mühendislik ve Doğa Bilimleri Ana Bilim Dalı
  12. Bilim Dalı: Belirtilmemiş.
  13. Sayfa Sayısı: Belirtilmemiş.

Özet

Bir grup otonom mobil robotun, verilen bir gorevi basarmak icin koordinelihareketi son on yilda onemli bir arastirma konusu olmustur. Robotlarin engellerleve grubun diger elemanlariyla carpismalarinin engellenmesi onceki calismalarin dagosterdigi gibi, bu alandaki en temel problemlerden biridir. Onemli miktarda aras-tirma cabasi koordineli davranis icindeki bir grup otonom mobil robot icin refer-ans yorungeler ortaya koyacak sanal kuvvetler tanimlama yonunde yogunlasmistir.Eger mobil robotlar holonom degillerse, holonom olmama kisitlamasi yanal yondekihareketi engelleyecegi icin, bu yaklasim koordineli hareketi kesin olarak saglamaya-bilir. Bu tez calismasinda bir grup otonom holonom olmayan mobil robotun ko-ordineli hareketini modelleme ve kontrol etme problemine, yeni bir carpisma en-gelleme algoritmasi da iceren, iki yeni yaklasim gelistirilmistir. Birinci yaklasimda,cevrimici carpismasiz yorungeler ortaya koyacak sanal kutle-yay-amortisor birim-lerinden olusan bir sanal referans model kullanilarak, otonom holonom olmayanmobil robotlar icin yeni bir koordinasyon metodu gelistirilmistir. Ikinci yaklasimdaise, robotlar icin cevrimici referans yorungeler dogrusal ve acisal hizlari cinsindenolusturulmustur. Ayrica, onerilen iki modelde de bir carpisma ongoruldugu zamanrobotlarin hizlarini guncelleyen yeni bir carpisma engelleme algoritmasi gelistirilmis-tir. Bazi koordineli gorev orneklerinin sunulmasiyla birlikte, onerilen modeller ben-zetimlerle dogrulanmistir. Carpisma engelleme algoritmasinin performansinin dog-rulanmasi icin deneyler yapilmistir.

Özet (Çeviri)

The coordinated motion of a group of autonomous mobile robots for the achieve-ment of a coordinated task has received significant research interest in the lastdecade. Avoiding the collisions of the robots with the obstacles and other mem-bers of the group is one of the main problems in the area as previous studies haverevealed. Substantial amount of research effort has been concentrated on definingvirtual forces that will yield reference trajectories for a group of autonomous mobilerobots engaged in coordinated behavior. If the mobile robots are nonholonomic, thisapproach fails to guarantee coordinated motion since the nonholonomic constraintblocks sideway motions. Two novel approaches to the problem of modeling coordi-nated motion of a group of autonomous nonholonomic mobile robots inclusive of anew collision avoidance scheme are developed in this thesis. In the first approach, anovel coordination method for a group of autonomous nonholonomic mobile robotsis developed by the introduction of a virtual reference system, which in turn impliesonline collision-free trajectories and consists of virtual mass-spring-damper units.In the latter, online generation of reference trajectories for the robots is enabled interms of their linear and angular velocities. Moreover, a novel collision avoidancealgorithm, that updates the velocities of the robots when a collision is predicted,is developed in both of the proposed models. Along with the presentation of sev-eral coordinated task examples, the proposed models are verified via simulations.Experiments were conducted to verify the performance of the collision avoidancealgorithm.

Benzer Tezler

  1. Dönel simetrik elemanların modüler tasarımı CAM-CNC integrasyonu ve simülasyonu

    Modular design, CAM-CNC integration and simulation of rotational parts

    HAKAN MESTÇİ

    Doktora

    Türkçe

    Türkçe

    1994

    Makine Mühendisliğiİstanbul Teknik Üniversitesi

    PROF.DR. MUSTAFA AKKURT

  2. ADIM: Üç boyutlu canlandırma sistemi

    ADIM: A 3D animation system

    A.GÖKHAN ERKMAN

  3. Yaş kemikler için elektromekanik bir model

    An Electromechanical model for wet bones

    M.TACETTİN ŞARIOĞLU

    Doktora

    Türkçe

    Türkçe

    1993

    Makine Mühendisliğiİstanbul Teknik Üniversitesi

    PROF.DR. HİLMİ DEMİRAY

  4. Robotik manipülatörlerin konfigürasyon bağımsız hata parametreleri ile kalibrasyonu

    Calibration of robotic manipulators by configuration independent error parametres

    SUAT DİDARİ

    Doktora

    Türkçe

    Türkçe

    1994

    Makine Mühendisliğiİstanbul Teknik Üniversitesi

    DOÇ.DR. M. SAİT YÜCENUR

  5. GPS ölçmelerinin planlanması ve ağ tasarımı

    Başlık çevirisi yok

    ERSOY ARSLAN

    Yüksek Lisans

    Türkçe

    Türkçe

    1998

    Jeodezi ve Fotogrametriİstanbul Teknik Üniversitesi

    Jeodezi ve Fotogrametri Mühendisliği Ana Bilim Dalı

    DOÇ. DR. ERSOY ASLAN