Farklı tip çimentoların yüksek sıcaklıklara direnci
Resistance of various types of cements to high temperature
- Tez No: 197386
- Danışmanlar: YRD. DOÇ. DR. İSMAİL ÇİL
- Tez Türü: Yüksek Lisans
- Konular: İnşaat Mühendisliği, Civil Engineering
- Anahtar Kelimeler: yangın direnci, çimento tipleri, kür, basınç ve eğilme dayanımı, elastisite modülü, Basınç dayanımı, fire resistance, cement types, curing, compressive and flexural strength, modulus of elasticity, Compressive strength
- Yıl: 2008
- Dil: Türkçe
- Üniversite: Ege Üniversitesi
- Enstitü: Fen Bilimleri Enstitüsü
- Ana Bilim Dalı: İnşaat Mühendisliği Ana Bilim Dalı
- Bilim Dalı: Belirtilmemiş.
- Sayfa Sayısı: Belirtilmemiş.
Özet
Diğer seramik malzemeler gibi metallere kıyasla beton, düşük termal iletkenliği ve yüksek özgül ısısı sebebiyle yangına karşı dirençte üstünlük sağlamakta ve bu özelliğiyle çelik donatıyı yangına karşı korumaktadır. Ancak betonarme bir yapının yüksek sıcaklıklara maruz kaldıktan sonra ayakta kalıp kalamayacağına karar verebilmek için betonun yangından sonraki fiziksel, kimyasal ve mekanik özelliklerindeki değişimin incelenmesi gerekir. Beton, makro seviyede hidrate çimento hamuruna gömülü agregalardan oluşan iki fazlı bir yapıdır. Hamur fazı, agregaya kıyasla yüksek sıcaklıklarda daha az kararlı olduğundan çimento hamurun yüksek sıcaklıklara direncinin araştırılması önem taşımaktadır.Bu çalışmada, TS EN 197-1 standardına uygun olarak hazırlanan 7 farklı tip çimento ve alüminli çimentoyla dökülen harç numunelerinin değişen derecelerde yüksek sıcaklıklara maruz bırakılması sonucunda fiziksel ve mekanik özeliklerindeki değişimler incelenmiştir. Tez kapsamında TS EN 196-1 deney metoduna uygun olarak hazırlanan harç numuneler üzerinde deneyler yapılmıştır. Yüksek sıcaklık etkisinden önce iki değişik kür rejimi uygulanmıştır. Bu amaçla, bir kısım numuneye atmosferik basınç altında 60°C `de 24 saat sıcak su kürü uygulandıktan sonra 28-gün havada bekletilmiş ve 20°C, 300°C, 600°C ve 900°C sıcaklıklara tabi tutulmuştur. Diğer bir kısım numune ise standart kür (28 gün-suda) işlemini takiben 28 gün de havada bekletilmiştir. Bu numuneler, sırasıyla 20°C, 150°C, 300°C, 450°C, 600°C ve 900°C sıcaklığa maruz bırakılmıştır. Numunelerin eğilme ve basınç dayanımları, elastisite modülleri ve ağırlıklarındaki değişim tespit edilmiştir. Böylece farklı tip çimentoların yüksek sıcaklıklara karşı direnci incelenmiştir.
Özet (Çeviri)
Similar to other ceramic materials, concrete is advantageous with its low thermal conductivity and high specific heat when compared to metals. These properties help concrete to protect steel reinforcement against fire. It is important to investigate the changes of physical, chemical and mechanical properties of concrete after fire to have an idea whether the reinforced concrete structure will collapse or not. Concrete is a two-phase material in macroscopic level, aggregate embedded in a hydrated cement paste (hcp) ?or a binder composed of hydrated cement and admixtures-. The properties of paste phase play an important role on the behavior of concrete. Normally, paste is less stable than aggregates when exposed to high temperatures, thus it is important to understand the resistance of paste to high temperatures.In this study, the changes in the physical and mechanical properties of mortar mixtures prepared from 7 different cements conforming to TS EN 197-1 and high alumina cement were investigated. The experimental studies were conducted on mortar mixtures prepared in accordance with TS EN 196-1. Two different curing regimes were applied before subjecting the specimens to high temperatures. A set of specimens were cured 28-days in air after hot water curing at 60°C for 24 hours. These specimens were subjected to 20°C, 300°C, 600°C and 900°C in order to investigate the effect of high temperatures. Other set of specimens were cured 28-days in air after standard curing (28-days-in water). Heat treatment levels for this set of specimens were 20°C, 150°C, 300°C, 450°C, 600°C and 900°C. The change in compressive and flexural strength, modulus of elasticity and weight of the specimens were recorded. Thus, the resistance of various types of cement to the high temperature was investigated.
Benzer Tezler
- Türk çimentolarının kırılma parametrelerinin belirlenmesi
Determination of fracture parameters of Turkish cement
MEHMET FIRAT
Yüksek Lisans
Türkçe
2005
İnşaat MühendisliğiFırat Üniversitesiİnşaat Mühendisliği Ana Bilim Dalı
Y.DOÇ.DR. RAGIP İNCE
- Uçucu kül, yüksek fırın cürufu ve translı çimentolarla üretilen aynı mukavemet sınıfındaki harçkarın dayanım ve dayanıklılığının incelenmesi
The investigation of strength and durability of the mortars, produced with fly ash, blast furnace slag and trass blended cements, which are in the same strength range
KEMAL ÇELİK
Yüksek Lisans
Türkçe
2005
İnşaat Mühendisliğiİstanbul Üniversitesiİnşaat Mühendisliği Ana Bilim Dalı
DOÇ. DR. FAHRİYE KILINÇKALE
- Değişik tip çimentoların ve bunlardan üretilen betonların sülfat direnci
Sulfate resistance of different types of cements and concrete produced from these cements
GÖZDE İNAN
Yüksek Lisans
Türkçe
2002
İnşaat MühendisliğiEge Üniversitesiİnşaat Mühendisliği Ana Bilim Dalı
DOÇ. DR. KAMBİZ RAMYAR
- Farklı üretim alanlarından alınan aynı tip çimentolarla üretilen beton özelliklerinin araştırılması
Searching the concrete particularities taken from the different production fields and produced by the same type of cements
KAZİM AYDIN
Yüksek Lisans
Türkçe
2006
İnşaat MühendisliğiFırat ÜniversitesiYapı Eğitimi Ana Bilim Dalı
Y.DOÇ.DR. MEHMET TUĞAL
- Effect of high volume natural pozzolan addition on the properties of pozzolanic cements
Yüksek hacimde doğal puzolan ilavesinin puzolanik çimentoların özelliklerine etkisi
BURAK UZAL
Yüksek Lisans
İngilizce
2002
İnşaat MühendisliğiOrta Doğu Teknik Üniversitesiİnşaat Mühendisliği Ana Bilim Dalı
DR. LUTFULLAH TURANLI