Heat treatment of iron ore agglomerates with microwave energy
Demir cevheri aglomerelerinin mikrodalga enerjisi ile ısıtılması
- Tez No: 167331
- Danışmanlar: PROF.DR. ALİ İHSAN AROL
- Tez Türü: Yüksek Lisans
- Konular: Maden Mühendisliği ve Madencilik, Mining Engineering and Mining
- Anahtar Kelimeler: microwaves, iron ore, magnetite, pelletizing, agglomerates, microwaves, iron ore, magnetite, pelletizing, agglomerates
- Yıl: 2005
- Dil: İngilizce
- Üniversite: Orta Doğu Teknik Üniversitesi
- Enstitü: Fen Bilimleri Enstitüsü
- Ana Bilim Dalı: Maden Mühendisliği Bölümü
- Bilim Dalı: Belirtilmemiş.
- Sayfa Sayısı: Belirtilmemiş.
Özet
ABSTRACT HEAT TREATMENT OF IRON ORE AGGLOMERATES BY MICROWAVE ENERGY Çırpar, Çiğdem M.Sc, Department of Mining Engineering Supervision Prof.Dr. Ali İhsan Arol January, 2005, 90 pages Pelletizing is a size enlargement technique employed to process fine-grained iron-bearing concentrates and powder ores. Mechanical strength of fired pellets is important for handling. When the pellets undergo metallurgical processing, their mechanical strength is a measure of their resistance to degradation by breakage due to impacts and abrasion to which they are exposed in the upper part of the blast furnace. In this study, heat treatment of iron ore agglomerates with microwave energy is investigated. First drying and then heat hardening tests were performed. Two main properties of pellets were taken into consideration: percent moisture and magnetite content for the dried pellets and compressive strength and also magnetite content for the fired pellets. The tests were conducted with different particle sized pellets, in different durations. In order to increase the oxidation rate in heat hardening tests, Na2Û2 is also added in different percentages. The results of the study showed that, magnetite pellets can indeed be dried and heated with microwave energy. However, the attained compressive strength and IVthe oxidation of the fired pellets were not sufficient as compared to pellets produced by conventional heating
Özet (Çeviri)
ABSTRACT HEAT TREATMENT OF IRON ORE AGGLOMERATES BY MICROWAVE ENERGY Çırpar, Çiğdem M.Sc, Department of Mining Engineering Supervision Prof.Dr. Ali İhsan Arol January, 2005, 90 pages Pelletizing is a size enlargement technique employed to process fine-grained iron-bearing concentrates and powder ores. Mechanical strength of fired pellets is important for handling. When the pellets undergo metallurgical processing, their mechanical strength is a measure of their resistance to degradation by breakage due to impacts and abrasion to which they are exposed in the upper part of the blast furnace. In this study, heat treatment of iron ore agglomerates with microwave energy is investigated. First drying and then heat hardening tests were performed. Two main properties of pellets were taken into consideration: percent moisture and magnetite content for the dried pellets and compressive strength and also magnetite content for the fired pellets. The tests were conducted with different particle sized pellets, in different durations. In order to increase the oxidation rate in heat hardening tests, Na2Û2 is also added in different percentages. The results of the study showed that, magnetite pellets can indeed be dried and heated with microwave energy. However, the attained compressive strength and IVthe oxidation of the fired pellets were not sufficient as compared to pellets produced by conventional heating
Benzer Tezler
- Entegre demir çelik tesislerinden ortaya çıkan katı atıkların değerlensirilmesi
Başlık çevirisi yok
LADİN ÇAMCI
Yüksek Lisans
Türkçe
1998
Metalurji Mühendisliğiİstanbul Teknik ÜniversitesiMetalurji Mühendisliği Ana Bilim Dalı
PROF. DR. SÜHEYLA AYDIN
- Erdemir sinterinin özelliklerine harman bileşiminin (özellikle BOF cürufunun) etkisi
The Effects of blend contents on the properties of Erdemir's sinter
ABDULKERİM MUMCU
- Beton çeliklerin oksidasyonu ve oksit tabakasının karakterizasyonu
Başlık çevirisi yok
S.SEMİH OCAKSÖNMEZ
- The Production of a ceramic magnet strontium hexaferrite
Stronsyum heksaferrit seramik mıktanıs üretimi
ERTUĞRUL ÇİFÇİ
Yüksek Lisans
İngilizce
1998
Metalurji MühendisliğiOrta Doğu Teknik ÜniversitesiMetalurji ve Malzeme Mühendisliği Ana Bilim Dalı
DOÇ. DR. ALİ KALKANLI
- Yüksek kromlu beyaz dökme demirlerin aşınma direncine alaşım elementlerinin ve ısıl işlemin etkisi
The effect of alloying elements and heat treatment on abrosive wear resistance of the high chromium white cast irons
MUSTAFA M. ARIKAN