Synthesis of oil based hyperbranched resins and their modification with melamine formaldehyde resins
Yağ esaslı dallanık reçinelerin yapımı ve melamin formaldehid reçineleriyle harmanlanma özelliklerinin araştırılması
- Tez No: 167203
- Danışmanlar: PROF.DR. GÜNGÖR GÜNDÜZ, PROF.DR. LEYLA ARAS
- Tez Türü: Yüksek Lisans
- Konular: Kimya Mühendisliği, Chemical Engineering
- Anahtar Kelimeler: Hyperbranched, Air drying, Castor oil, Linseed oil, Melamine- formaldehyde, Hyperbranched, Air drying, Castor oil, Linseed oil, Melamine- formaldehyde
- Yıl: 2005
- Dil: İngilizce
- Üniversite: Orta Doğu Teknik Üniversitesi
- Enstitü: Fen Bilimleri Enstitüsü
- Ana Bilim Dalı: Kimya Mühendisliği Bölümü
- Bilim Dalı: Belirtilmemiş.
- Sayfa Sayısı: Belirtilmemiş.
Özet
oz YAĞ ESASLI DALLANIK REÇİNELERİN YAPIMI VE MELAMİN FORMALDEHİD REÇİNELERİYLE HARMANLANMA ÖZELLİKLERİNİN ARAŞTIRILMASI Karakaya, Ceylan Yüksek Lisans, Kimya Mühendisliği Bölümü Danışman: Güngör Gündüz, Prof. Dr. Yardımcı Danışman: Leyla Araş, Prof. Dr. Ağustos 2005, 85 sayfa Bu çalışmada, alkitler gibi yağ asidi içeren dallanık reçineler sentezlenmiştir. Altı hidroksil grubu bulunan dipentaeritritol çekirdek molekül olarak kullanılmıştır ve (i) hint yağı ve (ii) hint yağı ve keten yağı karışımı ile 240°C'de katalizör olarak sodyum hidroksit kullanılarak transesterlenmiştir. Her iki durumda da oluşan moleküller, dimetilol propiyonik asit ile 140°C'de katalizör olarak p-toluen sulfonik asit kullanılarak esterleştirilmiştir. Sentezlenmiş dallanık reçinelerle birlikte kullanılmak üzere melamin- formaldehid reçinesi sentezlenmiştir ve 3:1 oranında tüm dallanık reçinelerle başarıyla harmanlanmıştır. vıFTIR spectroscopy was used to characterize the hyperbranched resins and the thermal properties were determined by DSC. DSC showed that the hyperbranched resins decomposed between 31 5-345°C. The viscosity of the resin that was synthesized by using only castor oil was 3.0 Pas and by using 50% linseed oil it was 1.0 Pas. When reacted with dimethylol propionic acid, the former's viscosity increased to 7.0 Pas, and the second's viscosity increased to 3.7 Pas. The hyperbranched resins showed excellent adhesion, gloss, flexibility, and formability. The mixture of hyperbranched resin plus melamine-formaldehyde resin samples had higher hardness values but lower gloss, adhesion and bending resistance values than the hyperbranched resins, and they had good impact and abrasion resistances.
Özet (Çeviri)
ABSTRACT SYNTHESIS OF OIL BASED HYPERBRANCHED RESINS AND THEIR MODIFICATION WITH MELAMINE FORMALDEHYDE RESINS Karakaya, Ceylan M.S., Department of Chemical Engineering Supervisor: Güngör Gündüz, Prof. Dr. Co-Supervisor: Leyla Aras, Prof. Dr. August 2005, 85 pages In this research hyperbranched resins containing fatty acid residues like alkyds were synthesized. Dipentaerythritol which has six hydroxyl groups was used as the core molecule, and it was transesterified with (i) castor oil, and (ii) a mixture of castor oil and linseed oil at 240°C in the presence of sodium hydroxide as catalyst. The resulting molecule, in either case, was then esterified with dimethylol propionic acid at 140°C in the presence of p- toluene sulfonic acid as catalyst. Melamine-formaldehyde resin was synthesized to be used with the synthesized hyperbranched resins, and it was successfully modified by all hyperbranched resins at a ratio of 3:1. IVFTIR spectroscopy was used to characterize the hyperbranched resins and the thermal properties were determined by DSC. DSC showed that the hyperbranched resins decomposed between 31 5-345°C. The viscosity of the resin that was synthesized by using only castor oil was 3.0 Pas and by using 50% linseed oil it was 1.0 Pas. When reacted with dimethylol propionic acid, the former's viscosity increased to 7.0 Pas, and the second's viscosity increased to 3.7 Pas. The hyperbranched resins showed excellent adhesion, gloss, flexibility, and formability. The mixture of hyperbranched resin plus melamine-formaldehyde resin samples had higher hardness values but lower gloss, adhesion and bending resistance values than the hyperbranched resins, and they had good impact and abrasion resistances.
Benzer Tezler
- Synthesis and characterization of hyperbranched and air drying fatty acid based resing
Aşırı dallı ve havada kuruyan yağ asidi kökenli reçine yapımı ve özelliklerinin belirlenmesi
ERHAN BAT
Yüksek Lisans
İngilizce
2005
Kimya MühendisliğiOrta Doğu Teknik ÜniversitesiKimya Mühendisliği Ana Bilim Dalı
PROF. DR. GÜNGÖR GÜNDÜZ
PROF. DR. DUYGU KISAKÜREK
- Preperation of oil-based polyurethanes for biomedical applications in the absence of solvent and catalyst
Yağ bazlı poliüretanların biyomedikal uygulamalar için çözücü ve katalizör olmadan hazırlanması
HANDE MADRA
Yüksek Lisans
İngilizce
2007
Polimer Bilim ve Teknolojisiİstanbul Teknik ÜniversitesiPolimer Bilim ve Teknolojisi Ana Bilim Dalı
PROF.DR. FATMA SENİHA GÜNER
- Synthesis of triglyceride based urethane macromers and their use in copolymerization
Trigliserid temelli üretan makromerlerin sentezi ve kopolimerizasyonda kullanımı
ALEV KÖPRÜLÜLÜ
Yüksek Lisans
İngilizce
2006
Polimer Bilim ve Teknolojisiİstanbul Teknik ÜniversitesiPolimer Bilim ve Teknolojisi Ana Bilim Dalı
PROF.DR. AYŞEN ÖNEN
- Organik çözücü bazlı boyalarda tiksotropik özellik kazandıracak polimerlerin sentezi
Synthesis of some polymers giving thixotropic property to organic solvent-based surface coatings
YILMAZ ERASLAN
Yüksek Lisans
Türkçe
2003
Kimya Mühendisliğiİstanbul Teknik ÜniversitesiKimya Mühendisliği Ana Bilim Dalı
PROF. DR. SENİHA GÜNER
- Ayçiçek asidik yağının enzimatik esterleşmesi
Enzymatic esterfication of sunflower acid oil
EBRU PİRİ
Yüksek Lisans
Türkçe
2003
Kimya Mühendisliğiİstanbul Teknik ÜniversitesiKimya Mühendisliği Ana Bilim Dalı
DOÇ. DR. AHMET SİRKECİOĞLU