Farklı porselen tamir materyallerinin bağlanma kuvvetlerinin değerlendirilmesi
The evaluation of bond strengths of four different porclain repair kits
- Tez No: 164289
- Danışmanlar: PROF.DR. HÜSEYİN YAZICIOĞLU
- Tez Türü: Doktora
- Konular: Diş Hekimliği, Dentistry
- Anahtar Kelimeler: Belirtilmemiş.
- Yıl: 2006
- Dil: Türkçe
- Üniversite: Gazi Üniversitesi
- Enstitü: Sağlık Bilimleri Enstitüsü
- Ana Bilim Dalı: Protetik Diş Tedavisi Ana Bilim Dalı
- Bilim Dalı: Belirtilmemiş.
- Sayfa Sayısı: Belirtilmemiş.
Özet
-76- ÖZET Bu çalışmada dört farklı porselen tamir materyali ile kompozite yapıştırılan feltspatik porselen ve Co-Ni alaşımı disklerin termal döngü testi uygulanmadan önce ve sonra makaslama kuvvetlerine karşı dirençlerinin değerlendirilmesi amaçlanmıştır. 208 adet kompozit disk 104 adet porselen ve 104 adet metal diskle Rely X (RE), Cojet (CO), Clerafil Repair (CL), Rocatec (RO) setleriyle yapıştırıldı, örnekler 1 hafta suda bekletildikten sonra yansına 5-55°C ısı arasında 1 dakika aralıkla 5000 kez termal döngü testi uygulandı, örneklerin tamamı universal test cihazında makaslama kuvvetine karşı test edildi. Termal döngü testinin uygulanmadığı porselen grupları arasında en yüksek bağlantı direncini CL, termal döngü testinin uygulandığı gruplarda ise RO göstermiştir. Termal döngü testinin uygulanmadığı metal grupları arasında en yüksek bağlantı direncini CO, termal döngü testinin uygulandığı gruplarda ise RO göstermiştir.
Özet (Çeviri)
-77. ABSTRACT In this study the evaluation of shear strengths of four different porcelain repair kits used for bonding composite to feltspathic porcelain and Co-Ni alloy discs before and after thermocycling has been aimed. 208 composite discs were bonded to 104 porcelain and 104 metal discs with Rely X (RE), Cojet (CO), Clerafil Repair (CL) and Rocatec (RO) repair kite. Half of the samples were themnocycled between 5 to 55 °C at 1 minute intervals for 5000 times. All of the samples were tested for shear bond strength on the universal test machine. In the porcelain sample groups, CL has shown the highest shear bond strength in the non-thermocycled group and RO has shown the highest shear bond strength in the thermocycled group. In the metal sample groups, CO has shown the highest shear bond strength in the non-thermocycled group, and RO has shown the highest shear bond strength in the thermocycled group.
Benzer Tezler
- Porselen restorasyonların tamirinde kullanılan farklı tamir materyallerinin çeşitli yüzey preparasyonları uygulanarak; kopma, bağlama, kırılma dirençlerinin in vitro ve in vivo olarak karşılaştırmalı değerlendirilmesi
The in vitro and in vivo evaluation of shear-bond strengths of different porcelain repair materials after various surface treatments
TOMURCUK ÖVÜL KÜMBÜLOĞLU GÖKTÜRK
- Işınla sertleşen porselen tamir kompozitleri ile porselen arası bağlantı kuvvetlerinin incelenmesi
An Investigation of bond strength between porcelain and light-cured composite resins which are used in the repair of fractured porcelain restorations
FAZIL İNCEOĞLU
Doktora
Türkçe
1999
Diş HekimliğiGazi ÜniversitesiProtetik Diş Tedavisi Ana Bilim Dalı
DOÇ. DR. BÜLENT BEK
- Farklı yüzey hazırlıklarının porselen meteryalinin bağlantı direncine olan etkilerinin incelenmesi
Evaluation of the effect of adhesion resistance of porcelain material on the different surface treatments
EYLEM ÖZDEMİR
Doktora
Türkçe
2005
Diş HekimliğiDicle ÜniversitesiProtetik Diş Tedavisi Ana Bilim Dalı
PROF.DR. REMZİ NİĞİZ
- İki farklı post-core sisteminde koronal mikrosızıntının boyama yöntemiyle karşılaştırılması
Comparison of coronal microleakage in two different post-core systems by die penetration method
SİMEL TEZCAN TAMER
- Üç farklı metal oksit kullanılarak laboratuar şartlarında izolatör sırı renklendirilmesi ve bu oksit oranlarının renk üzerine etkilerinin araştırılması
Under laboratory conditions, coloring of the insulator glaze by using three different metal oxides and the research of the effect of ratios of these oxides on coloring
TAMER ERAKMAN