Farklı yöntemlerle yapılan en masse retraksiyonun maksiller dentoalveolar yapılara etkilerinin sonlu elemanlar analizi ile değerlendirilmesi
Evaluation of the effects of en masse retraction performed using different methods on maxillary dentoalveolar structures by finite element analysis
- Tez No: 1017829
- Danışmanlar: DOÇ. DR. YASEMİN NUR KORKMAZ, DOÇ. DR. YASİN HEZENCİ
- Tez Türü: Diş Hekimliği Uzmanlık
- Konular: Diş Hekimliği, Dentistry
- Anahtar Kelimeler: En masse retraksiyon, Sonlu elemanlar analizi, Şeffaf plak, İnfrazigomatik mini vida, T-loop, Tie-back, En masse retraction, Finite element analysis, Clear aligner, Infrazygomatic mini screw, T-loop, Tie-back
- Yıl: 2026
- Dil: Türkçe
- Üniversite: Bolu Abant İzzet Baysal Üniversitesi
- Enstitü: Diş Hekimliği Fakültesi
- Ana Bilim Dalı: Ortodonti Ana Bilim Dalı
- Bilim Dalı: Belirtilmemiş.
- Sayfa Sayısı: Belirtilmemiş.
Özet
Bu çalışmada; tie-back, T-loop, şeffaf plak ve infrazigomatik krest (İZC) mini vida destekli şeffaf plak sistemleriyle yapılan en masse retraksiyon mekaniklerinin maksiller yapılarda oluşturduğu üç eksenli yer değiştirme ve Von Mises stres dağılımlarının üç boyutlu sonlu elemanlar analizi (SEA) ile karşılaştırılması amaçlanmıştır. Konik Işınlı Bilgisayarlı Tomografi (KIBT) verilerinden maksilla, kortikal/trabeküler kemik, dişler ve periodontal ligament (PDL) modellenmiştir. Anatomik model üzerinde dört farklı mekanik (M1: Şeffaf Plak, M2: İZC Destekli Şeffaf Plak, M3: T-Loop, M4: Tie-back) yapılandırılmıştır. Modellerde 200 g (1,96 N) standart yükleme uygulanarak ANSYS Workbench programı ile statik analizler yapılmıştır. Sagittal eksende (X); M4'te tork ve posterior ankraj kaybı, M3'te translasyona yakın hareket izlenmiştir. M1'te kanin dişinde maksimum sagittal yer değiştirme ve tork kaybı görülürken, M2 modelinde tüm dişlerde translasyona yakın hareket görülmüştür ve posterior ankraj korunmuştur. Transversal eksende (Y); M1 modelinde en masse retraksiyon kuvvetlerine karşı ön grup diş kronlarında palatinal deplasman, molar bölgede ise bukkal deplasmanla karakterize bir ark genişleme etkisi görülmüştür. Buna karşın, İZC destekli M2 modelinde ve sabit mekaniklerde (M3, M4) transversal ark formunun daha stabil kaldığı ve kontrolsüz bukkal/palatinal genişlemelerin sınırlandığı saptanmıştır. Vertikal eksende (Z); M4'te 'roller-coaster' etkisi saptanmıştır. Von Mises analizlerinde; en yüksek stres M1 anterior kök dokularında ölçülerek rezorpsiyon riskine işaret etmiş; M2 modelinde ise maksimum gerilmeler İZC mini vidası çevresinde, kortikal kemikte tespit edilmiştir. Şeffaf plakların en masse retraksiyondaki tork ve ankraj sınırlılıkları, İZC mini vidalarının kuvvet vektörü ile kompanse edilebilmektedir. İZC destekli plaklar, periodontal dokularda patolojik stres oluşturmadan en güvenli translasyonel diş hareketini sunmaktadır.
Özet (Çeviri)
The aim of this study was to compare the three-dimensional displacement patterns and Von Mises stress distributions generated in the maxillary structures by en masse retraction mechanics using tie-back, T-loop, clear aligner, and infrazygomatic crest (IZC) mini-screw-supported clear aligner systems through three-dimensional finite element analysis (FEA). The maxilla, cortical and trabecular bone, teeth, and the periodontal ligament (PDL) were modeled using cone-beam computed tomography (CBCT) data. Four different biomechanical systems were constructed on the anatomical model (M1: Clear Aligner, M2: IZC-Supported Clear Aligner, M3: T-Loop, M4: Tie-back). Static analyses were performed in ANSYS Workbench program under a standardized load of 200 g (1.96 N). In the sagittal axis (X), M4 exhibited torque loss and posterior anchorage loss, whereas M3 demonstrated near-translational tooth movement. In M1, the canine exhibited the greatest sagittal displacement and torque loss, whereas M2 demonstrated near-translational movement of all teeth while maintaining posterior anchorage. In the transverse axis (Y), M1 exhibited palatal displacement of the anterior tooth crowns in response to the en masse retraction forces, accompanied by buccal displacement in the molar region, indicating an arch expansion effect. In contrast, the IZC-supported M2 model and the fixed mechanics (M3 and M4) maintained a more stable transverse arch form, with uncontrolled buccal and palatal expansion being minimized. In the vertical axis (Z), a“roller-coaster”effect was observed in M4. According to the Von Mises stress analyses, the highest stress concentrations were detected in the anterior root structures in M1, indicating a potential risk of root resorption, whereas in M2, the maximum stresses were localized in the cortical bone surrounding the IZC mini-screw. The torque control and anchorage limitations associated with clear aligners during en masse retraction can be compensated by the force vector provided by IZC mini-screws. IZC-supported clear aligners provide the safest translational tooth movement without generating pathological stress in the periodontal tissues.
Benzer Tezler
- Transparan AlON seramiklerinin SPS ile üretimi ve geliştirilmesi, farklı katkıların transparanlık ve mekanik özellikler üzerindeki etkilerin incelenmesi
Production and development of transparent AlON ceramics with SPS, investigation of the effects of different additives on transparency and mechanical properties
DEMET AYDOĞMUŞ
Doktora
Türkçe
2024
Metalurji Mühendisliğiİstanbul Teknik ÜniversitesiMetalurji ve Malzeme Mühendisliği Ana Bilim Dalı
PROF. DR. FİLİZ ŞAHİN
- Kalkonoid ve alnuston benzeri bileşiklerin sentezi ve fotokimyasal dimerleşme reaksiyonlarının teorik hesaplamaları
Synthesis of chalconoid like compounds and their [2+2] photodimerizations in solution and theoretical calculations
AHMET YAŞAR
Yüksek Lisans
Türkçe
2005
KimyaKaradeniz Teknik ÜniversitesiKimya Ana Bilim Dalı
PROF.DR. NURETTİN YAYLI
- Yarı ergimiş tuz yöntemi ile kromit konsantresinden sodyum kromat üretimi
Production of sodium chromate from chromite ore via the sub-molten salt method
ECE TUNÇYÜREK
Yüksek Lisans
Türkçe
2023
Metalurji Mühendisliğiİstanbul Teknik ÜniversitesiMetalurji ve Malzeme Mühendisliği Ana Bilim Dalı
PROF. DR. SERVET İBRAHİM TİMUR
- Synthesis of alon, MgAlON and MgAl2O4 powders using thermo-chemical method
Termo-kimyasal yöntemle alon, MgAlON ve MgAl2O4 toz üretimi
HAMZA BOUSSEBHA
Doktora
İngilizce
2023
Metalurji MühendisliğiSakarya ÜniversitesiMetalurji ve Malzeme Mühendisliği Ana Bilim Dalı
PROF. DR. ALİ OSMAN KURT
- Poliaromatik fotobaşlatıcıların sentezi: Fotofiziksel ve fotokimyasal özelliklerinin incelenmesi
Synthesis of polyaromatic photoinitiators: Investigation of photophysical and photochemical properties
DEMET KARACA BALTA